Xen ARM with Virtualization Extensions/Salvator-X: Difference between revisions

From Xen
Jump to navigationJump to search
No edit summary
No edit summary
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== General information ==
== General information ==


This wiki talks about Xen on Salvator-X board [http://elinux.org/R-Car/Boards/Salvator-X Salvator-X](Cortex-A57 quad core + Cortex-A53 quadcore, code name r8a7795).
This wiki describes how to run XEN on Renesas Salvator-X board with R-Car H3 SoC.


Due to the fact that Renesas provide their reference software in form of [http://elinux.org/index.php?title=R-Car/Boards/Yocto-Gen3&oldid=446036 Yocto build instruction], it is provided additional steps in order to add XEN to the system being built. Those steps add meta-virtualization layer and a glue layer to the Yocto build.
{{WarningLeft|Only core-image-minimal configuration are now supported }}


XEN hypervisor is taken from a master branch of [http://xenbits.xen.org/gitweb/?p=xen.git xen.git].
== Setup ==


This wiki relies on Renesas Yocto version [http://elinux.org/index.php?title=R-Car/Boards/Yocto-Gen3&oldid=446036 2.19.0].
Follow setup are based & tested on official Renesas Yocto 2.12.0 release (https://github.com/renesas-rcar/meta-renesas/releases/tag/Renesas-Yocto-v2.12.0)


== Known limitations ==
* Checkout on follow commits

poky - 40376446904ae3529be41737fed9a0b650ed167d
Due to different XEN specifics there is a list of system deviations from Renesas'es reference software:
meta-linaro - 9b1fd178309544dff1f7453e796a9437125bc0d9

meta-openembedded - 8ab04afbffb4bc5184cfe0655049de6f44269990
* ATF exits to bootloader in EL2 mode
meta-renesas - 522efd09043aa8af1eec01af2b9e025df424d9a5
* TEE client is not functional
* Clone some additional yocto layers are required
* reserved memory is not supported
meta-selinux - 4c75d9cbcf1d75043c7c5ab315aa383d9b227510
* adsp, mmngr, mmngrbuf are dropped because they rely on reserved memory
meta-virtualizaion - 042425c1d98bdd7e44a62789bd03b375045266f5

* Clone meta-platform-xen repository in the same directory
Because of the fact that Renesas BSP u-boot uses cli-simple, adequate manual updating of fdt is not possible. So within the glue layer it is provided a [https://github.com/xen-troops/meta-demo/blob/master/meta-rcar-gen3-xen/recipes-kernel/linux/linux-renesas/r8a7795-salvator-x-xen.dts device tree] with changes required for XEN.
⚫
git clone https://github.com/qbeeukraine/meta-platform-xen.git -b 2.12/minimal

* Initialize yocto build environment
Please consider changes to dts and appropriate dtb load in case you want system configuration changes (i.e. nfs server ip, dom0 root option, xen command line, etc.)
source poky/oe-init-build-env

* Copy local.conf & bblayers.conf from supplied xen layer
== System build ==
cp meta-platform-xen/meta-rcar-gen3-xen/docs/sample/conf/salvator-x/linaro-gcc/bsp/*.conf ./conf/

* Build yocto
* Follow the [http://elinux.org/index.php?title=R-Car/Boards/Yocto-Gen3&oldid=446036 instruction] to the system build step 10, including it.
bitbake core-image-minimal

* Target images will be located in follow folder
* Add meta-virtualization layer with its dependencies:
build/tmp/deploy/images/salvator-x-xen
git clone git://git.yoctoproject.org/meta-virtualization -b morty ../meta-virtualization
bitbake-layers add-layer ../meta-virtualization
git clone git://git.yoctoproject.org/meta-selinux -b jethro ../meta-selinux
bitbake-layers add-layer ../meta-selinux
bitbake-layers add-layer ../meta-openembedded/meta-networking
bitbake-layers add-layer ../meta-openembedded/meta-python

* Add the glue layer
⚫
git clone https://github.com/xen-troops/meta-demo -b master ../meta-demo
bitbake-layers add-layer ../meta-demo/meta-rcar-gen3-xen

* Continue build steps from [http://elinux.org/index.php?title=R-Car/Boards/Yocto-Gen3&oldid=446036 instruction]


== BL2 & U-boot update procedure ==
== BL2 & U-boot update procedure ==


It is crucial to update ATF on the board in order to get XEN start in EL2.
Please reference to recent version of board manual for this procedure.

Follow bootloaders should be updated:
Please follow your board manual to find out ATF update procedure.
# BL2 bootloader - from on we leave bootloaders in EL2 mode

# U-boot - don't disable SCIF clock & don't update memory nodes in DTS file
== Running the system ==

Setup tftp and nfs as described in [http://elinux.org/index.php?title=R-Car/Boards/Yocto-Gen3&oldid=446036#Running_Yocto_images instruction].


Please consider that default expected nfs server setup is ''nfsroot=192.168.1.100:/srv/dom0''.
== Check u-boot environment variables ==


For the system boot issue from u-boot cli:
Set follow configuration in u-boot command prompt.
bootargs=dom0_mem=512M console=dtuart dtuart=serial0 dom0_max_vcpus=1 bootscrub=0 flask_enforcing=1
bootcmd=tftp 0x78080000 xen-salvator-x-xen.uImage; tftp 0x738000000 Image-r8a7795-salvator-x-dom0.dtb; tftp 0x7a000000 Image; tftp 0x7c000000 xenpolicy-salvator-x-xen; bootm 0x78080000 - 0x738000000


setenv bootargs #empties the bootargs added by u-boot
== Resources ==
tftp 0x48000000 Image-r8a7795-salvator-x-xen.dtb
[http://elinux.org/R-Car/Boards/Salvator-X Salvator-X elinux resource]
tftp 0x48080000 xen-salvator-x.uImage
[https://lists.xenproject.org/archives/html/xen-devel/2016-07/msg00109.html Board support patch series]
tftp 0x7a000000 Image
bootm 0x48080000 - 0x48000000


[[Category:XenARM]]
[[Category:XenARM]]
⚫
[[Category:Yocto]]
[[Category:Developers]]
[[Category:Developers]]
⚫
[[Category:Xen 4.7]]
[[Category:Xen 4.8]]

Latest revision as of 16:43, 14 July 2017

General information

This wiki describes how to run XEN on Renesas Salvator-X board with R-Car H3 SoC.

Due to the fact that Renesas provide their reference software in form of Yocto build instruction, it is provided additional steps in order to add XEN to the system being built. Those steps add meta-virtualization layer and a glue layer to the Yocto build.

XEN hypervisor is taken from a master branch of xen.git.

This wiki relies on Renesas Yocto version 2.19.0.

Known limitations

Due to different XEN specifics there is a list of system deviations from Renesas'es reference software:

  • ATF exits to bootloader in EL2 mode
  • TEE client is not functional
  • reserved memory is not supported
  • adsp, mmngr, mmngrbuf are dropped because they rely on reserved memory

Because of the fact that Renesas BSP u-boot uses cli-simple, adequate manual updating of fdt is not possible. So within the glue layer it is provided a device tree with changes required for XEN.

Please consider changes to dts and appropriate dtb load in case you want system configuration changes (i.e. nfs server ip, dom0 root option, xen command line, etc.)

System build

  • Follow the instruction to the system build step 10, including it.
  • Add meta-virtualization layer with its dependencies:
   git clone git://git.yoctoproject.org/meta-virtualization -b morty ../meta-virtualization
   bitbake-layers add-layer ../meta-virtualization
   git clone git://git.yoctoproject.org/meta-selinux -b jethro ../meta-selinux
   bitbake-layers add-layer ../meta-selinux
   bitbake-layers add-layer ../meta-openembedded/meta-networking
   bitbake-layers add-layer ../meta-openembedded/meta-python
  • Add the glue layer
   git clone https://github.com/xen-troops/meta-demo -b master ../meta-demo
   bitbake-layers add-layer ../meta-demo/meta-rcar-gen3-xen

BL2 & U-boot update procedure

It is crucial to update ATF on the board in order to get XEN start in EL2.

Please follow your board manual to find out ATF update procedure.

Running the system

Setup tftp and nfs as described in instruction.

Please consider that default expected nfs server setup is nfsroot=192.168.1.100:/srv/dom0.

For the system boot issue from u-boot cli: 

   setenv bootargs #empties the bootargs added by u-boot
   tftp 0x48000000 Image-r8a7795-salvator-x-xen.dtb
   tftp 0x48080000 xen-salvator-x.uImage
   tftp 0x7a000000 Image
   bootm 0x48080000 - 0x48000000
Retrieved from "https://wiki.xenproject.org/index.php?title=Xen_ARM_with_Virtualization_Extensions/Salvator-X&oldid=18127"