XenFAQ2: Difference between revisions

From Xen
Jump to navigationJump to search
(Moved to Xen_FAQ_Devices)
(Migrated to Xen_FAQ_DomU)
Line 91: Line 91:
Free_memory from "xm info" shows memory not allocated to any domain (inlcuding dom0). "free", "top" (or whatever) shows free memory on that particular domain (in your case, dom0). You can adjust memory allocation per domain using "xm mem-set".
Free_memory from "xm info" shows memory not allocated to any domain (inlcuding dom0). "free", "top" (or whatever) shows free memory on that particular domain (in your case, dom0). You can adjust memory allocation per domain using "xm mem-set".


== DomainU ==

=== My DomU does not fully start; it shows the following output stopping at Continue... ===


<pre><nowiki>
$ sudo xm console test
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

Xen virtual console successfully installed as xvc0 Event-channel device installed. netfront: Initialising virtual ethernet driver. i8042.c: No controller found. mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1

NET: Registered protocol family 17

Using IPI No-Shortcut mode xen-vbd: registered block device major 8 blkfront: sda2: barriers enabled XENBUS: Device with no driver: device/console/0 Freeing unused kernel memory: 140k freed kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

***************************************************************

***************************************************************
** WARNING: Currently emulating unsupported memory accesses **
** in /lib/tls glibc libraries. The emulation is **
** slow. To ensure full performance you should **
** install a 'xen-friendly' (nosegneg) version of **
** the library, or disable tls support by executing **
** the following as root: **
** mv /lib/tls /lib/tls.disabled **
** Offending process: modprobe (pid=663) **
***************************************************************
***************************************************************
Continuing...
</nowiki></pre>


It might only be that you don't have a VPS physical console, and that your VPS is fully booted, but you can't see it. There are few things to check.

First, check that your VPS has a "console" device in /dev. Mount your domU filesystem in the dom0, go in /dev and do:/dev/MAKEDEV console

If you are using a modern Xen kernel and hypervisor, you should check the parameters of the startup file. Check that it has the following option:


<pre><nowiki>
extra = "4 TERM=xterm xencons=tty console=tty1"
</nowiki></pre>


Then start your VPS and watch it booting. Note that once it's booted up, you should check that it has a xen friendly libc6 installed (in Debian, you would do "apt-get install libc6-xen").

=== Is there a way to set the credit-scheduler's limits and weights per domU in the domU configuration file? ===

weight= in the xm config file works, unless you are using RHEL or CentOS.

=== How do I start an application from within a DomU? ===

Well, you could always just log in to that VM, open a terminal and run the program. Or you could SSH or telnet in to the VM, start a screen session and run the program.

A VM acts just like any other server, so the proceedure for starting programs and executing commands locally and remotely are exactly the same as doing so on any computer.

=== My domUs are in a permanent 'b' (blocked) status as shown by 'xm list', even though they are functioning just fine. That's not normal, is it? ===

It's normal for them to show as blocked when they aren't actively running something - in the same way that any process on a 'normal' machine will show as blocked when it's waiting for input, each guest will show as blocked when it's got nothing to do. Give something a processor intensive task to do and you'll find it changes state to running (at least some of the time).

=== Is there any way, to get the name of a domU from the network-common script? ===


<pre><nowiki>
hostname=$(xenstore_read "$XENBUS_PATH/domain" | tr -- '_.:/+' '-----')
}}

=== Is it possible to increase the screen resolution of my xen guest Windows Vista? ===

On current Xen, with stdvga=1 & videoram=16, resolutions up to 2048x1536x32 are possible. All that said, the RDP suggestion is probably a better way to access the guest in any case.

=== How to install Solaris via HTTP as a para guest? ===

Solaris 10 can only be used as HVM guest. OpenSolaris can be used as PV guest, installed from iso. You can't install it from http. Once you have it installed, you also need zfs support for pygrub (either that, or manually copying kernel and boot archive to dom0)

Boris provides some nice examples on his site : http://bderzhavets.wordpress.com/

=== Is it possible to find out the specific vnc Display Number of a domU? ===

{{{
virsh vncdisplay domU_name_or_id xenstore-ls /local/domain/domU_id/console
</nowiki></pre>


=== I am trying to create a guest domain. I specified the configurations in /etc/xen-tools/xen- tools.conf and I ran $sudo xen-create-image --hostname=virtualrouter1 --role=udev the output is: sudo: xen-create-image: command not found ===

Make sure you installed the Xen tools, for example: apt-get install xen-tools

=== I'm trying to assign a dynamic hostname to a xen instance as follows: Cfg file ===

<pre><nowiki>
kernel = "/root/vmlinuz-2.6.18-128.1.14.el5xen" ramdisk = "/root/initrd-2.6.18-128.1.14.el5xen.img" memory = 512
hostname = "uniquehostname"

#hostname = " uniquehostname.xen.org" name = "my-vm-name"
. . . . .

</nowiki></pre>

In both the cases, the instance is unable to get the correct hostname..

From "xm create --help_config" : hostname=NAME Set the kernel IP hostname. interface=INTF Set the kernel IP interface name. dhcp=off|dhcp Set the kernel dhcp option.

On most LInux distros, kernel hostname and IP address is ignored, making it somewhat useless. You need to use your normal distro method to set hostname on domU (/etc/sysconfig/network on RHEL)

=== As far as I can see, there is something different between using 'xm create' and 'xm new' followed by 'xm start'. It's something to do with data being stored in [[XenStore]]. I couldn't suspend the one started with 'xm create'. Could someone please explain the effective difference between the two and when 'create' should be used instead of 'new' and vice-versa.===

xm create -> domU configuration is NOT managed by xend. Usually using config files on
/etc/xen. This is the easiest method to use for beginners, as you have a config file that you can edit manually. The default on RHEL5 (which uses Xen 3.1+).

"xm new" and "xm start" -> domU configuration is managed by xend. You change values using commands like "xm block-attach", which can modify settings online. No config file to edit manually. The default on current versions of Xen.

=== I have problem with domU clock. It lose 30 minutes each day. How can i synchronize it with dom0 clock? ===

Is this PV domU? If yes, setting /proc/sys/xen/independent_wallclock to 0 (the default)
should make it sync with dom0. You only need ntp on dom0, and domUs will follow.

The alternative, set /proc/sys/xen/independent_wallclock to 1 and run ntp on domU. If this is a HVM dom0, running ntp on domU is your friend.

Also, check
http://tuttodebian.blogspot.com/2008/05/xen-clocksource0-time-went-backwards.html to see if your system experience similar symptoms.

=== I would like to set sched-cred parameters on my domU configuration file. How can i do that? ===


<pre><nowiki>
cpu_cap & cpu_weight
</nowiki></pre>


Run "xm create --help_config" for details, and read http://wiki.xensource.com/xenwiki/CreditScheduler

=== Is it possible to increase guest memory without reboot? ===

You can do a "xm mem-set <Domain> <memory>" for a PV domU, but you had to set maxmem higher than current assignment beforehand.

=== Is it possible to take an already created domU sparse file and make it a non sparse file? ===


<pre><nowiki>
cp --sparse=never orig.img new.img
</nowiki></pre>


=== I have tried to change CD ISO images during a HVM install using the following commands but it doesn't work. After changing the CD ISO image, it doesn't detect the new ISO image. ===


<pre><nowiki>
(qemu) eject -f hdc (qemu) change hdc /media/hitachi/cd-rom-image.iso
</nowiki></pre>


se xm block-list <domid> to find the cdrom be-path for the domain, for example:


<pre><nowiki>
xm block-list 5 Vdev BE handle state evt-ch ring-ref BE-path 768 0 0 4 9 16383
/local/domain/0/backend/vbd/5/768 5632 0 0 1 -1 -1 /local/domain/0/backend/vbd/5/5632
</nowiki></pre>


Having identified the cdrom device (5632) you can check what iso image it is connected to:


<pre><nowiki>
xenstore-read /local/domain/0/backend/vbd/5/5632/params
</nowiki></pre>

(nothing returned)

To connect a new iso image:


<pre><nowiki>
xenstore-write /local/domain/0/backend/vbd/5/5632/params /mnt/gl3- tb1_store/MWWin2003R2SvrStdx86_BX2SVOL_EN.iso
</nowiki></pre>


And you can now see that it is connected:


<pre><nowiki>
xenstore-read /local/domain/0/backend/vbd/5/5632/params /mnt/gl3- tb1_store/MWWin2003R2SvrStdx86_BX2SVOL_EN.iso
</nowiki></pre>


This method works with both emulated devices and with gplpv drivers.

=== Is it possible to set the xen to boot the domU one by one when server starts, as currently we have 20 domU, and if boot them together, the the hard disk will be very very slow.===

cd /etc/xen/config/........ && for i in * do ...... (start VM, .....)...... sleep 60 (or whatever time you think is right to start a VM) done

=== I use FluidVM on some of our VPS host nodes, and the management server has crashed, so now I need to recover the running VM's, somehow. FluidVM deploys the domU's on the hostnode dynamically from a database, i.e. there's no /etc/xen/vps1 (for example) config files. The domU's are still running on the servers, and I now want to create config files for them, while they're running. How would I be able todo this? ===

For example, here's a list of running VM's from one of the servers:


<pre><nowiki>
root@usaxen02:[~]$ xm list
Name ID Mem(MiB) VCPUs State Time(s) AndriesBurger_39_cronos 90 255 1 -b---- 42.4
Bruce_18_carmen 60 255 1 r----- 3528327.5
Domain-0 0 3433 4 r----- 1116681.7
Rudi_14_mars 40 3007 2 -b---- 953036.3
Rudi_44_vps2 93 255 1 -b---- 22.9
</nowiki></pre>


=== Is there any way to create a config file, /etc/xen/AndriesBurger_39_cronos, from the running domU AndriesBurger_39_cronos ? ===

You can use "xm list -l" to dump the configuration in SXP format; then you should be able to use "xm new" or "xm create" with the "-F" option to load an SXP-based config file. See the "xm" man page for more info - that's where I dug up this.

=== How to set up Xen DomU as Windows 2008 Server on a CentOS Dom0 machine? ===

Start using the normal way that you usually do when you install a HVM domU, whether it's virt-manager/virt-install or using manually-created config file. One additional thing to note is that for
64bit HVM domUs you need to make sure that acpi, apic, and pae is set to 1 on domU config file.

Once you get that Win2008 fully installed, you can install GPLPV driver later to improve performance.




Revision as of 17:14, 12 November 2011


Icon todo.png Needs Refactor

This document would benefit from being broken up into smaller documents alongside topics and merged with split up documents from XenFAQ

Icon todo.png Needs Review

Not quite clear how up-to-date these questions and answers are.


This document has been created from http://www.xen.org/files/Support/XenUsersCommonlyAskedQuestions.pdf as a life version. Also see XenFAQ: this page needs correcting and merging into XenFAQ


Guest Related Questions

Guest Conversion

How do I convert a Centos HVM Guest to a PV Guest?

Creating a Centos HVM domU with working PV drivers : http://pastebin.com/fb6fe631 Converting HVM guest to PV guest : http://pastebin.com/f6a5022bf

If you follow both parts correctly you should have a working PV domU. If anything goes wrong during conversion process, you should still be able to boot the previous HVM domU config if you select the non-xen kernel (second entry) from grub menu.list.

I have an Xen image that was built for a graphical console (VNC). Is there any way to change it to the non-graphical console (xen console)?

For HVM guest, you need to enable serial port on domU config file (example here: http://pastebin.com/fb6fe631), and setup domU to use serial port (ttyS0 on Linux) by modifying (for Linux domU) /boot/grub/menu.lst, /etc/inittab, and /etc/securetty.

If it's PV guest, you need to set up domU to use xen console (which is xvc0 on current xen version, hvc0 on pv_ops kernel). It's similar to setting up domU for serial console, you just need to change ttyS0 to hvc0. An example of domU setup that can use both xvc0 and vnc console is here : http://pastebin.com/f6a5022bf

How do I remove an active virtual machine?

xm shutdown or xm delete

How do I run xm console to a WindowsXP DomU?

You can't xm console to that (I'm not sure you can xm console to any hvm, but I know you can't to one that doesn't have a console).

I start a new DomainU (Guest) and some text scrolls by for launching the guest but then it just sits there with Continue and no actions takes place?

The console for this new DomainU is not properly available for you; fix this by adding xtra="xencons=tty" in the configuration file. This will bring up a login screen directly for your new DomainU.

One of our CentOS 5.3 randomly reboots, at different times of the day, and I can't see why it's doing it. I have looked through the logs, but don't see any thing in there that shows me why it has rebooted. How can I debug this?

The problem is that when the box panics, it stops syslogd, so you don't get the panic output in /var/log. The best way to fix this is to setup a logging serial console.

Drivers

What are the GPLPV Drivers and where can I get them?

A collection of open source Window PV drivers that allow Windows to be para-virtualized. They are currently being implemented under the leadership of James Harper. More information on these drivers at:

How can I tell if the GPLPV Drivers are loaded correctly?

If the drivers are installed correctly there should be a Xen device under 'System Devices' in device manager.

Domain0

Why cannot I see all my RAM on my Dom0?

Domain 0 is a paravirt VM in reality, so the amount of ram you allocate to it is what you will see when using local tools like free, /proc/meminfo, top, etc.

To see the full system ram, you need to use the xm tools... and in this case, 'xm info' which will show you all the system resources, as opposed to the resources available to dom0.

Also, you have 16GB ram on the system... you probably already know this, but be aware that without a PAE enabled kernel (if you're using 32bit Xen) you'll only see 4GB of this. PAE will allow you to use up to 16, or maybe 32 (I don't remember what the upper limit for PAE enabled Xen is off the top of my head).

Is there any way of checking DomU´s I/O from Dom0?

iostat (Debian: sysstat-package)

Can I allocate one CPU to the Dom0 exclusively?

Add this to the kernel boot line - dom0_max_vcpus=1 & dom0_vcpus_pin

Edit /etc/xen/xend-config.sxp - set “(dom0-cpus 1)” Reboot Dom0 To try on an active system without a Reboot -

xm vcpu-set 0 1 xm vcpu-pin 0 0 0

Running xm info I see the following memory available; what does the free memory mean?

total_memory : 2046 free_memory : 5

Free_memory from "xm info" shows memory not allocated to any domain (inlcuding dom0). "free", "top" (or whatever) shows free memory on that particular domain (in your case, dom0). You can adjust memory allocation per domain using "xm mem-set".

Retrieved from "https://wiki.xenproject.org/index.php?title=XenFAQ2&oldid=579"