Xen via libvirt for OpenStack juno: Difference between revisions

From Xen
Jump to navigationJump to search
Line 98: Line 98:
[[Category:OpenStack]]
[[Category:OpenStack]]
[[Category:Libvirt]]
[[Category:Libvirt]]
[[Category:HowTo]]

Revision as of 23:27, 4 December 2014

This document describes steps I took to setup a compute node based on Ubuntu 14.04 for OpenStack "juno", using the Xen Project via libvirt approach. Openstack does not support this approach well as it is in the Group C of the hypervisor support matrix for Openstack. You can hardly find any tutorial online describing this approach and this might be the first. Let's get started!

Prerequisite

Follow "OpenStack Installation Guide for Ubuntu 14.04" to setup the control node and network node, following the three-node architecture with OpenStack Networking (neutron). This involves lots of configurations and could take a day or two. Check that the control node and network node is working.

Steps

NOTE: Steps 3, 4, and 5 are workarounds for bugs present in Ubuntu 14.04 (and probably in other Debian derivatives of that era). Future releases of Ubuntu may not require these workarounds.

1. Add OpenStack "juno" to the repository: 

apt-get update
apt-get install software-properties-common
add-apt-repository cloud-archive:juno
apt-get update

2. Install nova-compute-xen, sysfsutils and python nova client: 

apt-get install nova-compute-xen sysfsutils python-novaclient

3. Install qemu-2.0.2 with a patch fixing unmapping of persistent grants. Current qemu releases (including 2.0.2, 2.1.2 and 2.2.0-rc1) do not have this patch included and this will result in Dom0 kernel crashes when creating a Xen Project DomU from OpenStack GUI (horizon). I have applied this patch and make the modified qemu available in github: 

wget https://github.com/xinglin/qemu-2.0.2/archive/master.zip
unzip master.zip
cd qemu-2.0.2-master/
apt-get build-dep qemu
./configure
make -j16
make install

4. Add a patch to /etc/init.d/xen to start qemu process during startup: 

--- /etc/init.d/xen	2014-11-18 20:54:10.788457049 -0700
+++ /etc/init.d/xen.bak	2014-11-18 20:53:14.804107463 -0700
@@ -228,6 +228,9 @@ case "$1" in
		*) log_end_msg 1; exit ;;
	esac
	log_end_msg 0
+	/usr/local/bin/qemu-system-i386 -xen-domid 0 -xen-attach -name dom0 -nographic -M xenpv -daemonize \
+	    -monitor /dev/null -serial /dev/null -parallel /dev/null \
+	    -pidfile /var/run/qemu-xen-dom0.pid
	;;
  stop)
	capability_check

5. Create a link at /usr/bin for pygrub: 

 ln -s /usr/lib/xen-4.4/bin/pygrub /usr/bin/pygrub

6. Reboot the machine and boot into Xen Project Dom0.

7. Edit the /etc/nova/nova.conf, to configure nova service. You can also follow steps in the OpenStack installation guide to configure nova as a compute node.

  • In the default section, add the following: 
 [default]
 ...
 rpc_backend = rabbit
 rabbit_host = controller
 rabbit_password = RABBIT_PASS
 auth_strategy = keystone
 my_ip = MANAGEMENT_INTERFACE_IP_ADDRESS
 vnc_enabled = True
 vncserver_listen = 0.0.0.0
 vncserver_proxyclient_address = MANAGEMENT_INTERFACE_IP_ADDRESS
 novncproxy_base_url = http://controller:6080/vnc_auto.html
 verbose = True

MANAGEMENT_INTERFACE_IP_ADDRESS is the IP address of the management network interface for this compute node, typically 10.0.0.31 for the first compute node.

  • Add keystone_authtoken section:
 [keystone_authtoken]
 auth_uri = http://controller:5000/v2.0
 identity_uri = http://controller:35357
 admin_tenant_name = service
 admin_user = nova
 admin_password = NOVA_PASS
  • Add glance section:
[glance]
host=controller

8. Verify the conent of /etc/nova/nova-compute.conf is as following: 

[DEFAULT]
compute_driver=libvirt.LibvirtDriver
[libvirt]
virt_type=xen

9. Install and configure network component in compute node: Follow the steps outlined in this OpenStack install guide for neutron compute nodes. Note, in /etc/neutron/neutron.conf, I did not set "allow_overlapping_ips = True" in the default section, because it is said to set this property to False if both Neutron and the nova security groups are used together.

10. Finally step: now you should be able to launch an instance from horizon. In my case, I launched an instance running cirros-0.3.3-x86_64. When I login the compute node, I can see this instance running with virsh: 

# virsh --connect=xen:///
Welcome to virsh, the virtualization interactive terminal.

Type:  'help' for help with commands
       'quit' to quit

virsh # list
Id    Name                           State
----------------------------------------------------
1     instance-0000003b              running

Reference

Retrieved from "https://wiki.xenproject.org/index.php?title=Xen_via_libvirt_for_OpenStack_juno&oldid=13351"