Xen ARM with Virtualization Extensions/OdroidXU: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
{{TODO|Add page}} |
{{TODO|Add page}} |
||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
== Preparing the board == |
== Preparing the board == |
||
| Line 12: | Line 9: | ||
This will let XEN boot in hypervisor mode as well as set CNTFRQ through the trustzone. This is required for domUs to get the correct timer frequency. (dom0's optionally can pick it up from the device tree) |
This will let XEN boot in hypervisor mode as well as set CNTFRQ through the trustzone. This is required for domUs to get the correct timer frequency. (dom0's optionally can pick it up from the device tree) |
||
== Resources == |
|||
* Information about the OdroidXU board: [http://odroid.com/dokuwiki/doku.php?id=en:odroid-xu] |
|||
* Odroid XU forum: [http://forum.odroid.com/viewforum.php?f=59] |
|||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
Revision as of 18:44, 6 January 2015
|
To Do:
Add page |
Preparing the board
The bootloader provided with the OdroidXU does not let Xen boot in hypervisor mode. In the Odroid forums for the XU, one is likely to see many U-Boot blobs (bl1/bl2/tzsw/u-boot) which could possibly be used to let Xen boot in hypervisor mode. To avoid multiple sources, currently a single source is provided which can be accessed from https://github.com/suriyanr/linux-xen/tree/odroid-3.13.y/sd_fuse
The sd_fusing.sh script found therein can be used to fuse the SD card or eMMC card with the required BL1/BL2/TZSW and U-Boot. Example: ./sd_fusing.sh /dev/mmcblk0
This will let XEN boot in hypervisor mode as well as set CNTFRQ through the trustzone. This is required for domUs to get the correct timer frequency. (dom0's optionally can pick it up from the device tree)
