Xen ARM with Virtualization Extensions/Stout: Difference between revisions
Otyshchenko (talk | contribs) No edit summary |
Otyshchenko (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
[WIP] |
|||
This Wiki describes how to run Xen on Renesas Stout board with R-Car H2 SoC. |
This Wiki describes how to run Xen on Renesas Stout board with R-Car H2 SoC. |
||
Revision as of 12:53, 20 May 2019
This Wiki describes how to run Xen on Renesas Stout board with R-Car H2 SoC.
Main information how to deal with Stout board are located at: https://elinux.org/R-Car/Boards/Yocto https://elinux.org/R-Car/Boards/Stout
Prepare U-boot
Get U-Boot sources
Clone sources from upstream and checkout on commit 425c0a43fbbec36571f6a03b530695b8b16a841d “Prepare v2019.01-rc3”:
git clone git://git.denx.de/u-boot.git cd u-boot git checkout 425c0a43fbbec36571f6a03b530695b8b16a841d -b stout_uboot
Apply additional patches
Apply the following patch series (PSCI support for r8a7790 SoC): http://u-boot.10912.n7.nabble.com/PATCH-0-3-PSCI-support-for-r8a7790-SoC-Lager-Stout-boards-td357352.html
Configure U-Boot
export CROSS_COMPILE=<path_to_gcc> make stout_defconfig make menuconfig
Set maximum supported CPUs for PSCI to 8:
ARM architecture --->
[*] Enable support for booting in non-secure mode
(8) Maximum supported CPUs for PSCI
Build U-Boot
make
Copy resulting images to tftp directory for the future flashing:
sudo cp u-boot.img <path_to_tftp_dir>/ sudo cp spl/u-boot-spl.bin <path_to_tftp_dir>/
Prepare Xen
Get Xen sources
Clone sources from upstream and checkout on commit ca135a4863ffeedca451651835fcd9aef6c872ff “xen/arm: Add early printk support for SCIFA compatible UARTs”:
git clone git://xenbits.xenproject.org/xen.git cd xen git checkout ca135a4863ffeedca451651835fcd9aef6c872ff -b stout_xen
Apply additional patches
Apply the following small patch series (Support of handling nodes with “interrupts-extended” property): https://www.mail-archive.com/xen-devel@lists.xenproject.org/msg44364.html
Please note, if you can’t apply that patch series to Xen for some reason, then you should apply the following patch to Linux when preparing it (to not use “interrupts-extended” property for ARCH timer node): "0003-r8a7790.dtsi-temp-Use-interrupt-parent-interrupts-fo.patch"
Configure Xen
export CROSS_COMPILE=<path_to_gcc> XEN_TARGET_ARCH=arm32 ./configure cd xen make menuconfig XEN_TARGET_ARCH=arm32
Enable debugging option:
Debugging Options --->
[*] Developer Checks
Build Xen
With earlyprintk support:
cd ../ make xen XEN_TARGET_ARCH=arm32 debug=y CONFIG_EARLY_PRINTK=scif,0xe6c40000,A
- or -
Without earlyprintk support:
cd ../ make xen XEN_TARGET_ARCH=arm32 debug=y
Make Xen uImage:
mkimage -A arm -C none -T kernel -a 0x48000000 -e 0x48000000 -n "XEN" -d xen/xen xen-uImage
Build xenpolicy:
make -C tools/flask/policy
Copy resulting images to micro SD card (prepared beforehand):
sudo cp xen-uImage <path_to_sd_card_partition>/boot/ sudo cp tools/flask/policy/xenpolicy* <path_to_sd_card_partition>/boot/xenpolicy
Prepare Dom0 Linux and Host DT
Get Linux sources
Clone sources from upstream and checkout on v5.1 tag:
git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git cd linux git checkout v5.1 -b stout_linux
Apply additional patches
1. Apply the following patch (to not initialize CNTVOFF/counter module): https://marc.info/?l=linux-kernel&m=155808712932351&w=2
2. Apply the following patch (minimal Host DT needed to run Xen):
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f4f5aea..d7e0419 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -869,6 +869,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
r8a7790-stout.dtb \
+ r8a7790-stout-host.dtb \
r8a7791-koelsch.dtb \
r8a7791-porter.dtb \
r8a7792-blanche.dtb \
diff --git a/arch/arm/boot/dts/r8a7790-stout-host.dts b/arch/arm/boot/dts/r8a7790-stout-host.dts
new file mode 100644
index 0000000..8ef19dd
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7790-stout-host.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Stout board running XEN hypervisor
+ *
+ * Copyright (C) 2018 EPAM Systems Inc.
+ */
+
+#include "r8a7790-stout.dts"
+
+/ {
+ model = "Stout board, running XEN hypervisor";
+ compatible = "renesas,stout", "renesas,r8a7790";
+
+ chosen {
+ bootargs = "dom0_mem=768M console=dtuart dtuart=serial0 dom0_vcpus_pin hmp-unsafe=true dom0_max_vcpus=8 bootscrub=0 loglvl=all";
+ /delete-property/stdout-path;
+ xen,dom0-bootargs = "console=hvc0 ignore_loglevel root=/dev/mmcblk0p1 rootfstype=ext3 rw rootwait clk_ignore_unused";
+
+ modules {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ module@1 {
+ compatible = "xen,linux-zimage", "xen,multiboot-module";
+ reg = <0x0 0x72000000 0x0 0x02000000>;
+ };
+ module@2 {
+ compatible = "xen,xsm-policy", "xen,multiboot-module";
+ reg = <0x0 0x74000000 0x0 0x10000>;
+ };
+ };
+ };
+};
+
+&scifa0 {
+ /delete-property/clocks;
+};
3. Apply the following patch (to not use “interrupts-extended” property for ARCH timer node) if needed:
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 5a27477..8063d8b 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1855,10 +1855,11 @@
timer {
compatible = "arm,armv7-timer";
- interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
/* External USB clock - can be overridden by the board */
Configure Linux
Use default "shmobile_defconfig" as the base config:
export CROSS_COMPILE=<path_to_gcc> make ARCH=arm shmobile_defconfig
Add the following config entries in .config:
CONFIG_ARM_PSCI=y CONFIG_XEN=y CONFIG_XEN_DOM0=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y # CONFIG_XEN_WDT is not set CONFIG_XEN_DEV_EVTCHN=y CONFIG_XEN_BACKEND=y CONFIG_XENFS=y CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_GNTDEV=y CONFIG_XEN_GRANT_DEV_ALLOC=y CONFIG_XEN_PRIVCMD=y CONFIG_XEN_BLKDEV_BACKEND=y CONFIG_XEN_NETDEV_BACKEND=y
Build Linux and DT
LOADADDR=0x48000000 make ARCH=arm uImage dtbs
Copy resulting images to SD card (prepared beforehand):
sudo cp arch/arm/boot/dts/r8a7790-stout-host.dtb <path_to_sd_card_partition>/boot/ sudo cp arch/arm/boot/uImage <path_to_sd_card_partition>/boot/
Run images
Flash U-Boot
Flash U-Boot according to the instruction described here: https://elinux.org/R-Car/Boards/U-Boot-Gen2#Flashing_U-Boot Please note, you need to setup TFTP for this purpose.
Setup U-Boot environment
Setup U-Boot environment to boot system via SD card. This is done using U-Boot CLI:
env default -f -a setenv dtb_load_mmc 'ext4load mmc 0:1 0x70f00000 /boot/r8a7790-stout-host.dtb' setenv xen_load_mmc 'ext4load mmc 0:1 0x70007fc0 /boot/xen-uImage' setenv kernel_load_mmc 'ext4load mmc 0:1 0x72000000 /boot/uImage' setenv xenpolicy_load_mmc 'ext4load mmc 0:1 0x74000000 /boot/xenpolicy' setenv bootcmd_xen_mmc 'run dtb_load_mmc; run xen_load_mmc; run kernel_load_mmc; run xenpolicy_load_mmc; bootm 0x70007fc0 - 0x70f00000' setenv bootargs setenv bootcmd 'run bootcmd_xen_mmc' saveenv
After rebooting the board the system (Xen + Dom0) will be started automatically if everything was done correctly.
