Building Xenopsd

Xenopsd is the "domain management" component within the XCP toolstack.

Build from source prerequisites

You will need:

1. the normal build tools (on Debian install "build-essential git rsync wget")
2. the Xen development headers (on Debian install "libxen-dev")
3. the OCaml compiler (at least version 3.12.1)
4. the OCaml package manager, OPAM

Assuming a Debian wheezy system (other systems may differ), first install the system packages:

 $ sudo apt-get install build-essential git rsync wget libxen-dev ocaml camlp4-extra ocaml-native-compilers

Then install the OPAM tool:

 $ wget http://github.com/OCamlPro/opam/archive/0.8.3.tar.gz
 $ tar -xvzf 0.8.3.tar.gz
 $ cd opam-0.8.3
 $ ./configure
 $ make
 $ sudo make install

Next initialise OPAM, this will read in the definitions of common OCaml packages.

 $ opam init

Since OPAM packages are installed by default into a custom directory in $HOME/.opam, it's necessary to update some paths in your environment. The instructions will be printed to your terminal and typically look like the following:

To update $PATH, $MANPATH, $OCAML_TOPLEVEL_PATH, $CAML_LD_LIBRARY_PATH; you can now run:
           
   $ which opam && eval `opam config -env`

and add this in your ~/.profile

Let's build xenopsd (and its friends)

To make building easy, the development versions of xenopsd (and associated tools) are packaged into OPAM packages in a custom repository. To build, first add this repository as a remote:

 $ opam remote -add xen-dev git://github.com/xen-org/opam-repo-dev

The new packages found in this remote will be listed on your terminal and may be queried via "opam list". At the time of writing this list looked like:

The following NEW packages are available:
- fd-send-recv.1.0.0
- forkexecd.1.0.0
- message_switch.1.0.0
- shared-memory-ring.1.0.0
- xcp.1.0.0
- xen-api-client.1.0.0
- xenctrl.4.1.0
- xenops-cli.1.0.0
- xenopsd.1.0.0
- xenstore.2.0.0
- xenstore_transport.1.0.0

Finally, to build xenopsd (and its CLI) and all their dependencies, use the following command:

 $ opam install xenopsd xenops-cli

The xenospd binary will end up in .opam/system/bin and should be on your $PATH (if you followed the earlier instructions to update your environment)

If you get a linking error containing "xenguest", "xenctrl" or "xenstore" then check that:

1. you have installed libxen-dev (and "ldconfig -p" shows the libraries are available)
2. you have installed the ocaml native code compilers: the bytecode version doesn't currently work

Running xenopsd

First install a helper program:

 $ sudo apt-get install xcp-vncterm

Next, start the fork/exec service:

 $ sudo ./.opam/system/bin/xcp-fe

The build process also creates a basic configuration file. Start xenopsd using:

 $ sudo ./.opam/system/bin/xenopsd -config ./.opam/system/etc/xenopsd.conf

by default it will not daemonize and continue writing debug messages to the terminal.

To read the CLI help, try:

 $ xenops-cli
 $ xenops-cli add --help

Starting a simple VM

The xenops-cli is able to read and write VM config files in xm/xl syntax. First create a file with contents like:

name='myfirstvm'
builder='hvmloader'
boot='dc'
vcpus=1
memory=256
disk=[ 'phy:/dev/somedisk,hda,w', ',hdb:cdrom,r' ]
vif=[  ]
pci=[  ]
pci_msitranslate=1
pci_power_mgmt=0

Note the use of "phy:" above -- this is most likely to work for now. When we manage to separate the storage infrastructure from xapi it will be possible to name a disk using a GUID and have it be automatically managed.

Then register this VM with xenopsd:

$ sudo ./.opam/system/bin/xenops-cli add myvm.cfg

Now you should be able to see this VM in xenopsd's registered VM list:

$ xenops-cli list

You should be able to start the VM as follows:

$ xenops-cli start myfirstvm

Since it's running HVM, you will be able to connect to the qemu VNC display like this:

$ vncviewer localhost:1

Future

There's lots of stuff to do, including:

1. add support for libxl (in progress: Rob Hoes is working on it)
2. update the Debian packages (Mike McClurg is working on it)
3. package up squeezed, rrdd and xapi in the same way
4. separate the storage code from xapi so it can be used without xapi

Development

If you're interested in taking part or influencing development:

1. join the mailing list <xen-api@lists.xen.org>
2. join the IRC channel #xen-api on freenode
3. check out the code on http://github.com/djs55/xenopsd