Networking with the XAPI toolstack: Difference between revisions

From Xen
Jump to navigationJump to search
No edit summary
m (moved Networking with the XCP toolstack to Networking with the XAPI toolstack: Consistent use of XAPI toolstack)
(No difference)

Revision as of 12:41, 21 June 2013

The script for installing a Linux VM on Kronos provides for basic networking support.

To get networking working for Windows, you'll need to set up the bridge manually:

brctl addbr xenbr0
brctl addif xenbr0 eth0

You may need to move the IP address to the bridge rather than the physical interface. Having done this, try a pif-scan:

xe pif-scan


This should create the network for your interface.

After that you can (not sure if this is necessary) configure management interface. Because we already do have configured interface, it just saying XCP real situation around.

xe pif-reconfigure-ip pif-uuid=... mode=static IP=... mask=... gateway=... DNS=...
xe host-management-reconfigure pif-uuid=...

After scan and configuring it better to reboot to change status (plugged) to actual state of interface.