VM Startup

VM Startup

This page documents the current sequence of steps that take place when a VM is started.

Note that it is only the code-path for successful VM starts which is documented here. In some cases, failure paths involve attempts to reverse previous steps.

On the pool master

http://xenbits.xen.org/xapi/xen-api.hg?file/25e9038fce00/ocaml/xapi/message_forwarding.ml in function VM.start

• Mark the VM as currently being started (with_vm_operation).
  • Check that the start operation is valid on this VM (Xapi_vm_lifecycle.assert_operation_valid).
  • Add the start operation to the VM's current-operations (Db.VM.add_to_current_operations).
  • Update the VM's allowed operations (Xapi_vm_lifecycle.update_allowed_operations).
• Mark the VM's VBDs as currently being attached (with_vbds_marked). On each VBD:
  • Check that the attach operation is valid on this VBD (Xapi_vbd_helpers.assert_operation_valid).
  • Add the attach operation to the VBD's current-operations (Db.VBD.add_to_current_operations).
  • Update the VBD's allowed operations (Xapi_vbd_helpers.update_allowed_operations).
• Mark the VM's VIFs as currently being attached (with_vifs_marked). On each VIF:
  • Check that the attach operation is valid on this VIF (Xapi_vif_helpers.assert_operation_valid).
  • Add the attach operation to the VIF's current-operations (Db.VIF.add_to_current_operations).
  • Update the VIF's allowed operations (Xapi_vif_helpers.update_allowed_operations).
• Compute the 'memory overhead' of the VM so we know how much memory we need on a target host
• Find a suitable host
  • Either consult the 'Workload balancing' service (interface in workload_balancing.ml)
  • Or use the default logic in Xapi_vm_helpers.choose_host_for_vm:
    • Iterate through hosts, starting with the host the VM has affinity to (if any), then the other hosts in a random order (from a distribution biassed towards hosts with more memory) until one is found on which the VM can boot (Xapi_vm_helpers.choose_host_for_vm_no_wlb):
    • Check that the VM has an appropriate number of VCPUs (validate_vcpus).
    • Check that the VM's memory constraints are valid (validate_memory).
    • Check that the VM's shadow multiplier is valid (validate_shadow_multiplier).
    • Check that the VM can perform "after-crash" actions (validate_actions_after_crash).
    • Check that the host is live (assert_host_is_live).
    • Check that the host is enabled (assert_host_is_enabled).
    • Check that the host can see the SRs for the VM's VDIs (and the VM's suspend-VDI if it's suspended) (assert_can_see_SRs).
    • Check that the host has a PIF for the networks for the VM's VIFs.
    • Check that if the VM wants to boot HVM then the host is HVM-compatible.
    • Check that the host has enough memory for the VM.
    • Check that using this host preserves the HA plan (Xapi_ha_vm_failover.assert_vm_placement_preserves_ha_plan).
• Allocate the VM to the chosen host (allocate_vm_to_host).
  • Set the VM's last-booted record (Helpers.set_boot_record).
  • Set the VM as 'scheduled_to_be_resident_on' the chosen host (Db.VM.set_scheduled_to_be_resident_on).
• Execute the vm-start operation on the host (see below).
• Once the operation is complete:
  • Remove the vm-start operation from the host's current-operations (Db.Host.remove_from_current_operations).
  • Update the host's allowed operations (Xapi_host_helpers.update_allowed_operations).
  • Unset the VM's 'scheduled_to_be_resident_on' field.
  • Mark the VM's VIFs as currently being attached (with_vifs_marked). On each VIF:
  • Remove the attach operation from the VIF's current-operations (Db.VIF.add_to_current_operations).
  • Update the VIF's allowed operations (Xapi_vif_helpers.update_allowed_operations).
  • Mark the VM's VBDs as currently being attached (with_vbds_marked). On each VBD:
  • Remove the attach operation from the VBD's current-operations (Db.VBD.add_to_current_operations).
  • Update the VBD's allowed operations (Xapi_vbd_helpers.update_allowed_operations).
  • Mark the VM as no longer currently being started (with_vm_operation).
  • Remove the start operation from the VM's current-operations (Db.VM.add_to_current_operations).
  • Update the VM's allowed operations (Xapi_vm_lifecycle.update_allowed_operations).
  • Update the VM's VBDs' allowed operations (update_vbd_operations).
  • Update the VM's VIFs' allowed operations (update_vif_operations).
• Create a message saying that the VM was started.
• Push the RRD to the host (Monitor_rrds.push_rrd).

On the pool slave

http://xenbits.xen.org/xapi/xen-api.hg?file/25e9038fce00/ocaml/xapi/xapi_vm.ml

• Serialised with other host-local VM operations (in the vm_lifecycle_op queue), perform the following steps:
  • Lock the VM. This prevents the background event thread noticing any domains or devices.
  • Check that VM.power_state=Halted in the database
  • Get the last_booted_record of the VM from the database (Helpers.get_boot_record).
  • If VM.ha_restart_priority is set then set VM.ha_always_run to true in the database
  • If the VM has no BIOS strings set then set "generic whitebox" BIOS strings in the database
  • Starts the VM in the paused state (Vmops.start_paused).
    • Check VM parameters (Vmops.check_vm_parameter).
      • Check that the VM has more than 0 and fewer than 64 VCPUs.
      • Check that the device name of each of the VM's VBDs is unique.
      • Check that the VM has more than a global minimum amount of memory (currently 16MiB)
  • Get the list of VBDs which were marked by the message forwarding layer
    • Ask the host memory ballooning daemon to reserve memory (greater than VM.dynamic_min, up to VM.dynamic_max)
    • Verify that the host actually supports HVM, if this is an HVM domain
    • Create an empty xen domain
    • Add per-domain xenstore entries e.g. platform/ flags and BIOS strings. Note no devices are connected yet.
    • Set the domain ID in the database.
    • Clear all VBDs' and VIFs' 'currently-attached', 'status-code' and 'status-details' fields (Vmops.clear_all_device_status_fields).
    • Check to make sure a VDI record exists for each VBD (Vbdops.check_vdi_exists).
    • Set the machine address size, if it's specified in the VM's 'other-config' field.
    • Choose a "kernel" (Vmops.create_kernel).
      • Either the domain is PV so we either use the VM.PV_kernel path in dom0 or we run pygrub to extract the kernel from the guest's filesystem
      • Or the domain is HVM so we use hvmloader
  • Call the domain builder in libxenguest to prepare the domain's memory image
    • Also set vCPU -> pCPU affinity
    • Also set vCPU scheduling parameters: weight and cap
    • Also set the flags for NX, viridian, PAE, ACPI, APIC, ACPI S3, ACPI S4
  • For each VDI, call the storage backend vdi_attach (and, if necessary, vdi_activate)
    • Create xenstore entries for each configured vCPU (this enables PV guests to hotplug/unplug)
    • Add VIFs (Vmops.create_vifs).
      • Create the bridge for the VIF's network (Xapi_network.attach_internal).
      • If the VIF is on the special "Guest installer network", associate the DHCP lease to the VIF (Xapi_udhcpd.maybe_add_lease).
      • Write netfront/netback entries to xenstore
      • Wait for the add UEVENT to be processed by /etc/xensource/scripts/vif called from udev
  • If the guest is PV, write pcifront/backend entries to xenstore for any configured PCI passthrough devices
    • Mark the correct number of CPUs as initially online (NB only PV guests support hotplug)
    • If guest is HVM, create a qemu-dm process. qemu-dm is told to emulate RTL8193 NICs for up to the first 8 VIFs, a USB tablet and a VNC framebuffer
      • NB the commandline links the VIF MAC address, dom0 bridge name and dom0 tapX.Y device together. For each working VIF 2 interfaces end up on the bridge: one vifX.Y representing the PV drivers and one tapX.Y representing the emulated hardware
      • NB qemu only listens on 127.0.0.1 for vnc. It writes the port number to xenstore and xapi is responsible for forwarding connections to it.
  • If guest is PV, check if other-config:disable_pv_vnc is not true and run a vncterm process to export the console pty over VNC
    • NB vncterm only listens on 127.0.0.1 for vnc. It writes the port number to xenstore and xapi is responsible for forwarding connections to it.
    • NB If other-config:disable_pv_vnc=true, no vncterm copy is ran.
  • Write the VM.memory_dynamic_min and VM.memory_dynamic_max to xenstore for the per-host ballooning daemon to use
    • Update VM_metrcs.set_start_time in the database
    • Set the VM's last-booted record (Helpers.set_boot_record).
• Delete any guest metrics associated with the VM in the database (Xapi_vm_helpers.delete_guest_metrics).
  • Atomically clears VM.scheduled_to_be_resident_on and sets VM.resident_on
  • If domain is to be started paused, then set VM.power_state to Paused
  • If domain is to be started running, unpause domain and set VM.power_state to Running
  • Unlock the VM.