Xen 4.12 RC test instructions

From Xen
Jump to navigationJump to search
Icon Info.png If you come to this page before or after the Test Day is completed, your testing is still valuable, and you can use the information on this page to test, post any bugs and test reports to xen-devel@. If this page is more than two weeks old when you arrive here, please check the current schedule and see if a similar but more recent Test Day is planned or has already happened.


What needs to be tested

General things:

  • Making sure that Xen 4.12 compiles and installs properly on different software configurations; particularly on distros
  • Making sure that Xen 4.12, along with appropriately up-to-date kernels, work on different hardware.

For more ideas about what to test, please see Testing Xen.

ARM Smoke Testing

If you use ARM Hardware, which is not widely available or not rackable (and thus not part of our automated test suite), please check out Xen ARM Manual Smoke Test. Helping out to manually test ARM boards (which will only take a few minutes) will guarantee that Xen 4.12 will work on the board that you use. If you want to see which boards need testing, check Xen ARM Manual Smoke Test/Results.

Installing

Getting a RC

For the expressions/examples below, set the following bash/sh/... variable to the release candidate number (e.g. one of rc1, rc2, ... ) 

RC="<release candidate number>" # rc1, rc2 ...

Important notes: 

For RC1: RC=rc1.2 (see #RC1)

From xen.git

With a recent enough git (>= 1.7.8.2), just pull from the proper tag (4.12.0-$RC) from the main repo directly: 

git clone -b 4.12.0-$RC git://xenbits.xen.org/xen.git

With an older git version (and/or if that does not work, e.g., complaining with a message like this: Remote branch 4.12.0-$RC not found in upstream origin, using HEAD instead), do the following: 

git clone git://xenbits.xen.org/xen.git ; cd xen ; git checkout 4.12.0-$RC

From tarball

Download: 

 https://downloads.xenproject.org/release/xen/4.12.0-$RC/xen-4.12.0-$RC.tar.gz 
 https://downloads.xenproject.org/release/xen/4.12.0-$RC/xen-4.12.0-$RC.tar.gz.sig

Building

Instructions are available for building Xen on Linux, NetBSD, and FreeBSD

Known issues

Namespace changes affecting downstreams and users

  • kdd (tool for debugging guest OSes with the windows kernel debugger) has been renamed to xen-kdd in order to reduce namespace pollution.
  • The fsimage library used by pygrub, which does not have a stable ABI, and the corresponding python module, have been renamed to 'xenfsimage' (to reduce namespace pollution). Any out-of-tree users of this library will have to be updated.

Test instructions

General

  • Remove any old versions of Xen toolstack and userspace binaries (including qemu).
  • Remove any Xen-related udev files under /etc because Xen 4.12 doesn't use those anymore.
  • Download and install the most recent Xen 4.12 RC, as described above. Make sure to check the README and INSTALL for changes in required development libraries and procedures. Some particular things to note:

Once you have Xen 4.12 RC installed check that you can install a guest etc and use it in the ways which you normally would, i.e. that your existing guest configurations, scripts etc still work.

For more ideas about what to test, please see Testing Xen or the sections below. Note that typically specific tests for new features will be added around RC2.

Credit2 is now the default scheduler

For more information see [1] and [2] - see the Testing Section for more information on testing.

Specific ARM Test Instructions

Follow Xen_ARM_with_Virtualization_Extensions and Xen_ARM_with_Virtualization_Extensions#Testing

Boards and hardware we do not test in our CI Loop

Although we do have automated Test Infrastructure for the project, we only include rackable hardware into our CI Loop. We do have a mixture of Allwinner and Exynos processors in a custom chassis. If you have one of the following boards and want to ensure it runs on Xen 4.12, please make sure you run the Xen ARM Manual Smoke Test on an RC.

Boards not tested by our CI Loop: Allwinner sun6i/A31, DRA7[J6] EVM, Exynos5410, HiKey board from 96boards.org, Mustang (XC-1), OMAP5432, Renesas R-Car H2, Versatile Express and Xilinx Zynq Ultrascale MPSoC

We are also not able to include non-production servers that require a legal agreement such as an NDA into our Test Infrastructure.

Dom0less

Icon todo.png To Do:

Stefano to add some information here - also see http://xenbits.xen.org/docs/unstable/features/dom0less.html


Specific x86 testing instructions

HVM and PV only Hypervisor builds

You can disable PV and / or HVM interfaces with the following steps: 

 1. Call `make menuconfig` in xen directory.
 2. Enter "Architecture Features" submenu.
 3. Select "PV support" / "HVM support" as you see fit.

Or you can edit existing config file by adding or changing CONFIG_HVM and CONFIG_PV options.

Note that we're to figure out if these options should be guarded by XEN_CONFIG_EXPERT.

To run an HVM-only hypervisor, you must use a Dom0 kernel capable of booting as PVH guest. Linux 4.19 kernel is a good start.

Qemu Deprivilege

Icon todo.png To Do:

George/Anthony to add instructions here - also see http://xenbits.xen.org/docs/unstable/features/qemu-deprivilege.html


PVH Dom0

Icon todo.png To Do:

Royger to add instructions here


RC specific things to test

None for now.

Reporting Bugs (& Issues)

  • Use Freenode IRC channel #xentest to discuss questions interactively
  • Report any bugs / missing functionality / unexpected results.
  • Please put [TestDay] into the subject line
  • Also make sure you specify the RC number you are using
  • Make sure to follow the guidelines on Reporting Bugs against Xen (please CC the relevant maintainers and the Release Manager - julien dot grall at arm dot com).

Reporting success

We would love it if you could report successes by e-mailing xen-devel@lists.xen.org, preferably including:

  • Hardware: Please at least include the processor manufacturer (Intel/AMD). Other helpful information might include specific processor models, amount of memory, number of cores, and so on
  • Software: If you're using a distro, the distro name and version would be the most helpful. Other helpful information might include the kernel that you're running, or other virtualization-related software you're using (e.g., libvirt, xen-tools, drbd, &c).
  • Guest operating systems: If running a Linux version, please specify whether you ran it in PV or HVM mode.
  • Functionality tested: High-level would include toolstacks, and major functionality (e.g., suspend/resume, migration, pass-through, stubdomains, &c)

The following template might be helpful: should you use Xen 4.12.0-<Some RC> for testing, please make sure you state that information! 

Subject: [TESTDAY] Test report
 
* Hardware:
 
* Software:

* Guest operating systems:

* Functionality tested:

* Comments:

For example: 

Subject: [TESTDAY] Test report
 
* Hardware: 
Dell 390's (Intel, dual-core) x15
HP (AMD, quad-core) x5
 
* Software: 
Ubuntu 10.10,11.10
Fedora 17

* Guest operating systems:
Windows 8
Ubuntu 12.10,11.10 (HVM)
Fedora 17 (PV)

* Functionality tested:
xl
suspend/resume
pygrub

* Comments:
Window 8 booting seemed a little slower than normal.

Other than that, great work!
Retrieved from "https://wiki.xenproject.org/index.php?title=Xen_4.12_RC_test_instructions&oldid=19121"