XAPI toolstack on a Debian-based distribution
Introduction
This is Project Kronos. Follow these instructions to get XCP toolstack (including xapi, the XenAPI server daemon) installed on an Ubuntu Oneiric or Debian Squeeze box, using the upstream Linux kernel. This will effectively allow you to turn an existing Ubuntu or Debian machine into an XCP host. Note that this is *very much* a work-in-progress. Some features will be broken, and there will be a bit of manual configuration required. We appreciate any testing you do for this project, but please don't consider this production ready yet! Please visit the Kronos Supported Features page for a list of XCP features that are known to work on Kronos.
What's the best environment?
The best environment is a clean installed modern system with significant amounts of RAM in it and several cores. However, this guide is written in the knowledge that not everyone will be in the lucky position of having such a box to play with. In fact, many of us will be installing it on a moderately-sized box with an existing (upgraded) version of Ubuntu or Debian running. One of the authors of this guide (MikeCamel) is in exactly that position, so you are not alone. Hopefully this guide will be relevant to you, and will provide working instructions. If you have a problem, let us know.
A note about kernels Kronos is really aimed at distributions (such as Ubuntu Precise Pangolin) which use the 3.2 kernel. There is a nasty bug in the 3.0 series (and probably before) which means that, between them, a couple of the components of Xen are going to reduce the size of Dom0 (and therefore your main operating environment) to something under 1 GiB, which may cause you significant problems. There are work-arounds (TODO: provide work-arounds...), but this is a real issue if you're planning to run the XCP toolstack on Oneiric, for instance. There is a http://wiki.xen.org/wiki/Using_XCP_-_preparing_the_toolstack.
Prepare your system
| Action | Debian Squeeze | Ubuntu Oneiric |
|---|---|---|
| Install OS | Install Debian Squeeze.
Convert to Unstable:
perl -pi -e 's/squeeze/unstable/g' /etc/apt/sources.list apt-get update apt-get dist-upgrade |
Install Ubuntu Oneiric.
Kronos will work with either Ubuntu Oneiric Server or Desktop, with the default kernel. If you want to use local storage, you will have to reserve an unformatted partition on your hard disk for xapi. In a later step, you will use this partition to create a local storage repository. |
| Install any required firmware | Install firmware (only if necessary - http://wiki.debian.org/Firmware) | |
| Set up repositories | Add the following to /etc/apt/sources.list
deb http://ftp.uk.debian.org/debian/ experimental main deb-src http://ftp.uk.debian.org/debian/ experimental main |
Add the following to /etc/apt/sources.list
deb http://ppa.launchpad.net/ubuntu-xen-org/xcp-unstable/ubuntu oneiric main deb-src http://ppa.launchpad.net/ubuntu-xen-org/xcp-unstable/ubuntu oneiric main |
Install xapi
This step installs XCP's xapi and all its dependencies, including the Xen hypervisor.
apt-get update apt-get install xcp-xapi apt-get install xcp-xe
Once you've installed these packages, you can just do an `apt-get update && apt-get upgrade` to keep up with the latest builds.
Post-install setup
a) Optional: Make xen the default grub entry.
sed -i 's/GRUB_DEFAULT=""/GRUB_DEFAULT="Xen 4.1-amd64"/' /etc/default/grub update-grub
Note: given the default set up for Ubuntu's grub (in /etc/default/grub), you don't get to see the splashscreen with kernel boot options. If you do want to see the list of options, you may need to change some of the settings in this file.
b. Setup the network/interfaces file:
This is likely to be /etc/network interfaces - ensure that you don't remove any existing settings. Note that if you are running a DHCP server on this machine, then you may need to change the xenbr0 interface to a static or manual IP address, as DHCP may not come up in time to provide an address otherwise.
auto lo xenbr0
iface xenbr0 inet dhcp
bridge_ports eth0
c. Setup the xensource-inventory file:
Note: this assumes that the root partition is on /dev/sda1 - change if required. Note: this assumes that your management interface will be xenbr0 - change if required.
control_domain=`uuidgen`
installation=`uuidgen`
cat > /etc/xcp/xensource-inventory << EOF
CURRENT_INTERFACES='xenbr0'
BUILD_NUMBER='0'
CONTROL_DOMAIN_UUID='${control_domain}'
INSTALLATION_UUID='${installation}'
MANAGEMENT_INTERFACE='xenbr0'
PRIMARY_DISK='/dev/sda1'
EOF
