Setting boot order for domUs

From Xen
Jump to navigationJump to search

How to change the boot order (boot sequence) in Xen PV and HVM guests.

HVM guests

Use the boot parameter: 

# boot on floppy (a), hard disk (c), Network (n) or CD-ROM (d)
# default: hard disk, cd-rom, floppy
boot="cda"

Put the letters in order from left to right, the drive corresponding to the first letter on the left is going to be the one that boots first. For example if you want to boot from cd-rom first, then from the network and lastly from the hard-disk, this is what you need to set your boot parameter to: 

boot="dnc"


PV guests

PV guests don't run in an fully emulated environment like HVM guests. As a consequence they cannot boot from the network (pxeboot) or from a cdrom. They can however boot from a user provided kernel or from one of the kernels installed in the VM disk image.

boot from a user specified kernel

You just need to pass the right kernel and initrd parameters: 

# Kernel image to boot
kernel = "/boot/vmlinuz"

# Ramdisk (optional)
ramdisk = "/boot/initrd.gz"

You can also pass an extra parameter to specify the kernel command line, that allows you to choose the root disk: 

# Kernel command line options
extra = "root=/dev/xvda1"

boot from a kernel installed in the VM disk

You need to add the following two lines to the VM config file: 

bootloader = '/usr/bin/pygrub'
extra = "(hd0)/boot/grub/menu.lst"

Make sure you pass -c to xl create to connect to the guest's console right away.


network boot solutions and workarounds

Xenpvnetboot

You can use Xenpvnetboot.

It supports many schemes for fetching the kernel.

pypxeboot

The older solution for this is pypxeboot, which can be found i.e. here: https://github.com/blamarvt/pypxeboot with documentation to be found at http://zhigang.org/files/docbook/xen-pxeboot.html

This only works with the deprecated xm toolstack and should not be used for newer systems.

It looks for a dhcp server, requests a kernel info via PXE and then launches the VM with the kernel received. If the kernel from PXE is invalid, or not was offered, it will do local boot using pygrub.

The advantages were it being PXE compatible and supporting fall-through to local disk. (This means it works like a normal BIOS boot order would)

xl create wrapper

Otherwise you can write yourself a simple wrapper script that:

  • gets the kernel and initrd from the network;
  • updates the kernel and initrd parameters in the VM config file;
  • calls 'xl create config-file.

Note this will not fetch a new kernel / command line on reboot. you may need to use on_reboot = destroy and handle VM restarts from your script. If you're going that route, expect some extra work and consider dynamically creating the VM configs all the time.

Retrieved from "https://wiki.xenproject.org/index.php?title=Setting_boot_order_for_domUs&oldid=12257"