Using Xen PV Drivers on HVM Guest
From Xen
Jump to navigationJump to search
This article describes how to use Xen Project para-virtualized drivers on HVM guest.
- Host: Oracle VM Server 2.1.2
- Guest: Oracle Enterprise Linux 5 (kernel 2.6.18)
Virtual Storage Devices
If the Linux guest initialized the qemu-dm emulated IDE/SCSI device, then Xen Project para-virtualized storage driver cannot initialize it. So we should first prevent the guest from initial the emulated devices.
If you are specifying the disk as:
disk = [ 'file:/system.img,hda,w', 'file:/disk1.img,sda,w', 'file:/disk2.img,xvda,w', ]
Then:
- hda will be emulated as an IDE device, which will be initialized by the ide driver of the Linux guest. The ide driver is often built into the Linux kernel. You can add the following kernel command line to prevent the kernel from initializing the device:
ide0=noprobe
- Note
- for Linux kernel v2.6.25+, use "ide_core.noprobe=x.y" instead. "hdx=noprobe" and "idex=noprobe" have been removed.
- sda will be emulated as a SCSI device, which will be initialized by the sym53c8xx driver. The sym53c8xx driver is often build as a kernel module. You can add the following line to /etc/modprobe.conf to prevent the module from auto-loading:
alias sym53c8xx off
- Note
- if it doesn't work, you can get it by move the module out from
/lib/modules/`uname -r`/.
- xvda will never be emulated by qemu-dm. So no extra actions is needed. xvd device is always the best choice to use if you want use a PV driver. Note: as in http://www.lanana.org/docs/device-list/devices-2.6+.txt:
202 block Xen Virtual Block Device
0 = /dev/xvda First Xen VBD whole disk
16 = /dev/xvdb Second Xen VBD whole disk
32 = /dev/xvdc Third Xen VBD whole disk
...
240 = /dev/xvdp Sixteenth Xen VBD whole disk
Partitions are handled in the same way as for IDE
disks (see major number 3) except that the limit on
partitions is 15.
The Xen Project VBD disk will always be xvdX under Linux.
