Difference between revisions of "Asking Xen User Questions"

From Xen
(Moved questions to Xen_FAQ_Networking)
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
  +
{{Info|The content of this page is available in targetted FAQ's. We are keeping this page for historical reasons (as it is likely to be frequently linked to). All FAQ's are at [[:Category:FAQ]].}}
<!-- MoinMoin name: XenUsersQuestions -->
 
<!-- Comment: replace stephen.spector with community.manager@xen.org -->
 
<!-- WikiMedia name: XenUsersQuestions -->
 
<!-- Page revision: 00000007 -->
 
<!-- Original date: Tue Jan 25 16:12:06 2011 (1295971926000000) -->
 
<!-- ## Please edit system and help pages ONLY in the moinmaster wiki! For more -->
 
<!-- ## information, please see [[MoinMaster]]:[[MoinPagesEditorGroup]]. -->
 
<!-- ##master-page:[[HomepageReadWritePageTemplate]] -->
 
<!-- ##master-date:Unknown-Date -->
 
<!-- #format wiki -->
 
<!-- #language en -->
 
   
  +
For:
{{Needs_Refactor|Needs splitting and moving into the smaller FAQs on [[:Category:FAQ]]}}
 
  +
* Please send an e-mail to xen-users@lists.xenproject.org and follow [[Xen Users Netiquette]]
 
  +
* For '''quick questions''', check out the '''#XEN''' [https://xenproject.org/help/irc.html IRC channel on irc.freenode.net]
= Xen Users Mailing List Commonly Asked Questions =
 
  +
* '''Raising bugs''', see [[Reporting Bugs against Xen Project]]
 
  +
* '''Man pages''' are at [http://xenbits.xen.org/docs/unstable/ docs/unstable]. For man pages of a specific release, go to [http://xenbits.xen.org/docs/ xenbits.xen.org/docs] and choose the right version.
== Introduction ==
 
  +
* Documentation, see [http://xen.org/support/documentation.html documentation on xenproject.org]
This document is a Xen.org community effort to gather the most commonly asked questions from the xen-users emailing list and other support tools to assist new and experienced Xen hypervisor users with problems that frequently arise. If you would like to add content to this document, please send an email to community.manager@xen.org for editing rights if you don't have wiki editing rights already.
 
  +
* HowTo's, see [[:Category:HowTo]], you can find a few example topics that are available from this page here:
For those users interested in trying Xen without installing the application, a Live CD version is available at http://wiki.xensource.com/xenwiki/LiveCD.
 
  +
** [[XenNetworking|Xen Networking]]
 
  +
** [[FreeBSDdomU|Xen FreeBSD]]
== Support Tools ==
 
  +
** Adding USB Devices to Xen HVM - http://www.virtuatopia.com/index.php
The following sites are available for Xen hypervisor support:
 
* xen-users mailing list - http://lists.xensource.com/mailman/listinfo/xen-users
+
** Xen on Fedora - http://rackerhacker.com/2011/08/05/xen-4-1-on-fedora-15-with-linux-3-0/
* Xen 3.3 Documentation - http://bits.xensource.com/Xen/docs/user.pdf
+
** Create and Install CentOS on Xen - http://wiki.centos.org/HowTos/Xen/InstallingCentOSDomU
  +
** http://www.virtuatopia.com/index.php/Configuring_a_VNC_based_Graphical_Console_for_a_Xen_Paravirtualized_domainU_Guest
* Stack Oveflow - http://stackoverflow.com/
 
  +
** https://help.ubuntu.com/community/Xen Xen on Ubuntu
* Complete email history of all xen mailing lists - http://xen.markmail.org
 
  +
* Guest Conversion, see [[Xen_FAQ_Guest_Conversion]]
* Language Specific Support
 
  +
* Console, see [[Xen_FAQ_Console]]
** Japanese - http://lists.xensource.com/mailman/listinfo/xen-japanese
 
  +
* Drivers, see [[Xen_FAQ_Drivers,_Windows]]
** Portuguese - http://groups.google.com/group/xen-br
 
  +
* Domain0, see [[Xen_FAQ_Dom0]]
 
  +
* DomainU/Guests, see [[Xen_FAQ_DomU]]
== How To Guide Links ==
 
  +
* Devices, see [[Xen_FAQ_Devices]]
The Xen.org community Wiki has a [[HowTo]] Page with various information sources at http://wiki.xensource.com/xenwiki/HowTos. Updates to this Wiki page are continuous so check back often for new How Tos.
 
  +
* Installation Questions, see [[Xen_FAQ_Installation]]
Sample topics internally within the Wiki are:
 
  +
* Networking Questions, see [[Xen_FAQ_Networking]]
* [[XenNetworking| Xen Networking]]
 
  +
* Security Questions, see [[Xen_FAQ_Security]]
* [[FreeBSDdomU| Xen FreeBSD]]
 
  +
* Design/Misc Questions, see[[Xen_FAQ_Design_and_in_Depth]]
 
Sample topics with external links are:
 
* Adding USB Devices to Xen HVM - http://www.virtuatopia.com/index.php
 
* Xen on Fedora - http://rackerhacker.com/2011/08/05/xen-4-1-on-fedora-15-with-linux-3-0/
 
* Create and Install CentOS on Xen - http://wiki.centos.org/HowTos/Xen/InstallingCentOSDomU
 
* http://www.virtuatopia.com/index.php/Configuring_a_VNC_based_Graphical_Console_for_a_Xen_Paravirtualized_domainU_Guest
 
* https://help.ubuntu.com/community/Xen Xen on Ubuntu
 
 
== Guest Related Questions ==
 
=== Guest Conversion ===
 
Q (G1.0): How do I convert a Centos HVM Guest to a PV Guest?
 
 
A (G1.0): Creating a Centos HVM domU with working PV drivers : http://pastebin.com/fb6fe631 Converting HVM guest to PV guest : http://pastebin.com/f6a5022bf
 
If you follow both parts correctly you should have a working PV domU. If anything goes wrong during conversion process, you should still be able to boot the previous HVM domU config if you select the non-xen kernel (second entry) from grub menu.list.
 
=== Console ===
 
 
Q (G2.0): I have an Xen image that was built for a graphical console (VNC). Is there any way to change it to the non-graphical console (xen console)?
 
 
A (G2.0): For HVM guest, you need to enable serial port on domU config file (example here: http://pastebin.com/fb6fe631), and setup domU to use serial port (ttyS0 on Linux) by modifying (for Linux domU) /boot/grub/menu.lst, /etc/inittab, and /etc/securetty.
 
If it's PV guest, you need to set up domU to use xen console (which is xvc0 on current xen version, hvc0 on pv_ops kernel). It's similar to setting up domU for serial console, you just need to change ttyS0 to hvc0. An example of domU setup that can use both xvc0 and vnc console is here : http://pastebin.com/f6a5022bf
 
 
Q (G2.1): How do I remove an active virtual machine?
 
 
A (G2.1): xl shutdown or xl delete
 
 
Q (G2.2): How do I run xl console to a WindowsXP DomU?
 
 
A (G2.2): You can't xl console to that (I'm not sure you can xl console to any hvm, but I know you can't to one that doesn't have a console).
 
 
Q (G2.3): I start a new DomainU (Guest) and some text scrolls by for launching the guest but then it just sits there with Continue and no actions takes place?
 
 
A (G2.3): The console for this new DomainU is not properly available for you; fix this by adding xtra="xencons=tty" in the configuration file. This will bring up a login screen directly for your new DomainU.
 
 
Q (G2.4): One of our CentOS 5.3 randomly reboots, at different times of the day, and I can't see why it's doing it. I have looked through the logs, but don't see any thing in there that shows me why it has rebooted. How can I debug this?
 
 
A (G2.4): The problem is that when the box panics, it stops syslogd, so you don't get the panic output in /var/log. The best way to fix this is to setup a logging serial console.
 
 
Q (G2.5): Hi, i want to stop VMs, but when i execute xl destroy vmname the VM disappears completly from mu vm list (xl list) How can I stop them without delete them?
 
 
A (G2.5): You've probably been using "xl create". That's the way it works.
 
 
=== Drivers ===
 
Q (G3.0): What are the GPLPV Drivers and where can I get them?
 
 
A (G3.0): A collection of open source Window PV drivers that allow Windows to be para-virtualized. They are currently being implemented under the leadership of James Harper. More information on these drivers at:
 
* http://wiki.xensource.com/xenwiki/XenWindowsGplPv/Installing
 
* http://lists.xensource.com/archives/html/xen-users/2009-04/msg00058.html
 
* http://meadowcourt.org/downloads/
 
 
Q (G3.1): How can I tell if the GPLPV Drivers are loaded correctly?
 
 
A(G3.1): If the drivers are installed correctly there should be a Xen device under 'System Devices' in device manager.
 
 
=== Domain0 ===
 
Q (G4.0): Why cannot I see all my RAM on my Dom0?
 
 
A (G4.0): Domain 0 is a paravirt VM in reality, so the amount of ram you allocate to it is what you will see when using local tools like free, /proc/meminfo, top, etc.
 
To see the full system ram, you need to use the xm tools... and in this case, 'xm info' which will show you all the system resources, as opposed to the resources available to dom0.
 
Also, you have 16GB ram on the system... you probably already know this, but be aware that without a PAE enabled kernel (if you're using 32bit Xen) you'll only see 4GB of this. PAE will allow you to use up to 16, or maybe 32 (I don't remember what the upper limit for PAE enabled Xen is off the top of my head).
 
 
Q (G4.1): Is there any way of checking DomU´s I/O from Dom0?
 
 
A (G4.1): iostat (Debian: sysstat-package)
 
 
Q (G4.2): Can I allocate one CPU to the Dom0 exclusively?
 
 
A (G4.2): Add this to the kernel boot line
 
* dom0_max_vcpus=1 & dom0_vcpus_pin
 
* Edit /etc/xen/xend-config.sxp - set “(dom0-cpus 1)”
 
* Reboot Dom0
 
* To try on an active system without a Reboot -
 
* xm vcpu-set 0 1 xm vcpu-pin 0 0 0
 
 
Q (G4.3): Running xm info I see the following memory available; what does the free memory mean?
 
total_memory : 2046 free_memory : 5
 
 
A (G4.3): Free_memory from "xm info" shows memory not allocated to any domain (inlcuding dom0). "free", "top" (or whatever) shows free memory on that particular domain (in your case, dom0). You can adjust memory allocation per domain using "xm mem-set".
 
 
=== DomainU ===
 
Q (G5.0): My DomU does not fully start; it shows the following output stopping at Continue...
 
 
$ sudo xm console test
 
 
io scheduler cfq registered
 
 
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
 
 
Xen virtual console successfully installed as xvc0 Event-channel device installed. netfront: Initialising virtual ethernet driver. i8042.c: No controller found. mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1
 
 
NET: Registered protocol family 17
 
 
Using IPI No-Shortcut mode xen-vbd: registered block device major 8 blkfront: sda2: barriers enabled XENBUS: Device with no driver: device/console/0 Freeing unused kernel memory: 140k freed kjournald starting. Commit interval 5 seconds
 
 
EXT3-fs: mounted filesystem with ordered data mode.
 
 
* **************************************************************
 
* **************************************************************
 
* * WARNING: Currently emulating unsupported memory accesses **
 
* * in /lib/tls glibc libraries. The emulation is **
 
* * slow. To ensure full performance you should **
 
* * install a 'xen-friendly' (nosegneg) version of **
 
* * the library, or disable tls support by executing **
 
* * the following as root: **
 
* * mv /lib/tls /lib/tls.disabled **
 
* * Offending process: modprobe (pid=663) **
 
* **************************************************************
 
* **************************************************************
 
Continuing...
 
 
A (G5.0): It might only be that you don't have a VPS physical console, and that your VPS is fully booted, but you can't see it. There are few things to check.
 
 
First, check that your VPS has a "console" device in /dev. Mount your domU filesystem in the dom0, go in /dev and do:
 
 
/dev/MAKEDEV console
 
 
If you are using a modern Xen kernel and hypervisor, you should check the parameters of the startup file. Check that it has the following option:
 
 
extra = "4 TERM=xterm xencons=tty console=tty1"
 
 
Then start your VPS and watch it booting. Note that once it's booted up, you should check that it has a xen friendly libc6 installed (in Debian, you would do "apt-get install libc6-xen").
 
 
Q (G5.1): is there a way to set the credit-scheduler's limits and weights per domU
 
in the domU configuration file?
 
 
A (G5.1): weight= in the xm config file works, unless you are using RHEL or CentOS.
 
 
Q (G5.2): How do I start an application from within a DomU?
 
 
A (G5.2): Well, you could always just log in to that VM, open a terminal and run the program.
 
Or you could SSH or telnet in to the VM, start a screen session and run the program.
 
A VM acts just like any other server, so the proceedure for starting programs and executing commands locally and remotely are exactly the same as doing so on any computer.
 
 
Q (G5.3): My domUs are in a permanent 'b' (blocked) status as shown by 'xm list', even though they are functioning just fine. That's not normal, is it?
 
 
A (G5.3): It's normal for them to show as blocked when they aren't actively running something - in the same way that any process on a 'normal' machine will show as blocked when it's waiting for input, each guest will show as blocked when it's got nothing to do. Give something a processor intensive task to do and you'll find it changes state to running (at least some of the time).
 
 
Q (G5.4): Is there any way, to get the name of a domU from the network-common script?
 
 
A (G5.4): hostname=$(xenstore_read "$XENBUS_PATH/domain" | tr -- '_.:/+' '-----')
 
 
Q (G5.5): Is it possible to increase the screen resolution of my xen guest Windows Vista?
 
 
A (G5.5): On current Xen, with stdvga=1 & videoram=16, resolutions up to 2048x1536x32 are possible. All that said, the RDP suggestion is probably a better way to access the guest in any case.
 
 
Q (G5.6): How to install Solaris via HTTP as a para guest?
 
 
A (G5.6): Solaris 10 can only be used as HVM guest. [[OpenSolaris]] can be used as PV guest, installed from iso. You can't install it from http. Once you have it installed, you also need zfs support for pygrub (either that, or manually copying kernel and boot archive to dom0)
 
 
Boris provides some nice examples on his site : http://bderzhavets.wordpress.com/
 
 
Q (G5.7): Is it possible to find out the specific vnc Display Number of a domU?
 
 
A (G5.7): virsh vncdisplay domU_name_or_id
 
xenstore-ls /local/domain/domU_id/console
 
 
Q (G5.8): I am trying to create a guest domain. I specified the configurations in /etc/xen-tools/xen-tools.conf and I ran $sudo xen-create-image --hostname=virtualrouter1 --role=udev the output is: sudo: xen-create-image: command not found
 
 
A (G5.8): Make sure you installed the Xen tools, for example: apt-get install xen-tools
 
 
Q(G5.9): I'm trying to assign a dynamic hostname to a xen instance as follows:
 
 
Cfg file
 
kernel = "/root/vmlinuz-2.6.18-128.1.14.el5xen"
 
ramdisk = "/root/initrd-2.6.18-128.1.14.el5xen.img"
 
memory = 512
 
hostname = "uniquehostname"
 
<!-- #hostname = " uniquehostname.xen.org" -->
 
name = "my-vm-name"
 
* . . . .
 
In both the cases, the instance is unable to get the correct hostname..
 
 
A (G5.9): From "xm create --help_config" : hostname=NAME Set the kernel IP hostname. interface=INTF Set the kernel IP interface name. dhcp=off|dhcp Set the kernel dhcp option.
 
On most LInux distros, kernel hostname and IP address is ignored, making it somewhat useless. You need to use your normal distro method to set hostname on domU (/etc/sysconfig/network on RHEL)
 
 
Q(G5.10): As far as I can see, there is something different between using 'xm create' and 'xm new' followed by 'xm start'. It's something to do with data being stored in [[XenStore]]. I couldn't suspend the one started with 'xm create'. Could someone please explain the effective difference between the two and when 'create' should be used instead of 'new' and vice-versa.
 
 
A(G5.10): xm create -> domU configuration is NOT managed by xend. Usually using config files on /etc/xen. This is the easiest method to use for beginners, as you have a config file that you can edit manually. The default on RHEL5 (which uses Xen 3.1+).
 
"xm new" and "xm start" -> domU configuration is managed by xend. You change values using commands like "xm block-attach", which can modify settings online. No config file to edit manually. The default on current versions of Xen.
 
 
G (G5.11): I have problem with domU clock. It lose 30 minutes each day. How can i synchronize it with dom0 clock?
 
 
A (G5.11): Is this PV domU? If yes, setting /proc/sys/xen/independent_wallclock to 0 (the default) should make it sync with dom0. You only need ntp on dom0, and domUs will follow.
 
The alternative, set /proc/sys/xen/independent_wallclock to 1 and run ntp on domU. If this is a HVM dom0, running ntp on domU is your friend.
 
Also, check
 
http://tuttodebian.blogspot.com/2008/05/xen-clocksource0-time-went-backwards.html to see if your system experience similar symptoms.
 
 
G (G5.12): I would like to set sched-cred parameters on my domU configuration file. How can i do that?
 
 
A (G5.12): cpu_cap & cpu_weight
 
Run "xm create --help_config" for details, and read http://wiki.xensource.com/xenwiki/CreditScheduler
 
 
G (G5.13): Is it possible to increase guest memory without reboot?
 
 
A (G5.13): You can do a "xm mem-set <Domain> <memory>" for a PV domU, but you had to set maxmem higher than current assignment beforehand.
 
 
G (G5.14): Is it possible to take an already created domU sparse file and make it a non sparse file?
 
 
A (G5.14): cp --sparse=never orig.img new.img
 
 
G (G5.15): I have tried to change CD ISO images during a HVM install using the following commands but it doesn't work. After changing the CD ISO image, it doesn't detect the new ISO image.
 
(qemu) eject -f hdc (qemu) change hdc /media/hitachi/cd-rom-image.iso
 
 
A (G5.15): Use xm block-list <domid> to find the cdrom be-path for the domain, for example:
 
xm block-list 5 Vdev BE handle state evt-ch ring-ref BE-path 768 0 0 4 9 16383 /local/domain/0/backend/vbd/5/768 5632 0 0 1 -1 -1 /local/domain/0/backend/vbd/5/5632
 
Having identified the cdrom device (5632) you can check what iso image it is connected to:
 
xenstore-read /local/domain/0/backend/vbd/5/5632/params
 
(nothing returned)
 
To connect a new iso image:
 
xenstore-write /local/domain/0/backend/vbd/5/5632/params /mnt/gl3-tb1_store/MWWin2003R2SvrStdx86_BX2SVOL_EN.iso
 
And you can now see that it is connected:
 
xenstore-read /local/domain/0/backend/vbd/5/5632/params /mnt/gl3-tb1_store/MWWin2003R2SvrStdx86_BX2SVOL_EN.iso
 
This method works with both emulated devices and with gplpv drivers.
 
 
Q (G5.16): Is it possible to set the xen to boot the domU one by one when server starts, as currently we have 20 domU, and if boot them together, the the hard disk will be very very slow.
 
 
A (G5.16): cd /etc/xen/config/........ && for i in * do ...... (start VM, .....)...... sleep 60 (or whatever time you think
 
is right to start a VM) done
 
 
Q (G5.17): I use FluidVM on some of our VPS host nodes, and the management server
 
has crashed, so now I need to recover the running VM's, somehow. FluidVM deploys the domU's on the hostnode dynamically from a database, i.e. there's no /etc/xen/vps1 (for example) config files. The domU's are still running on the servers, and I now want to create config files for them, while they're running.
 
 
How would I be able todo this?
 
 
For example, here's a list of running VM's from one of the servers:
 
 
root@usaxen02:[~]$ xm list
 
Name ID Mem(MiB) VCPUs State Time(s)
 
AndriesBurger_39_cronos 90 255 1 -b---- 42.4
 
Bruce_18_carmen 60 255 1 r----- 3528327.5
 
Domain-0 0 3433 4 r----- 1116681.7
 
Rudi_14_mars 40 3007 2 -b---- 953036.3
 
Rudi_44_vps2 93 255 1 -b---- 22.9
 
 
Is there any way to create a config file, /etc/xen/AndriesBurger_39_cronos, from the running domU
 
AndriesBurger_39_cronos ?
 
 
A (G5.17):You can use "xm list -l" to dump the configuration in SXP format; then you should be able to use "xm new" or "xm create" with the "-F" option to load an SXP-based config file. See the "xm" man page for more info - that's where I dug up this.
 
 
Q (G5.18): How to set up Xen DomU as Windows 2008 Server on a CentOS Dom0 machine?
 
 
A (G5.18): Start using the normal way that you usually do when you install a HVM domU, whether it's virt-manager/virt-install or using manually-created config file. One additional thing to note is that for 64bit HVM domUs you need to make sure that acpi, apic, and pae is set to 1 on domU config file.
 
Once you get that Win2008 fully installed, you can install GPLPV driver later to improve performance.
 
 
Q (G5.19): I need to install windows streaming media server on one of my xen3.4.2 guest. Is it possible to create a windows xp paravirtual guest on xen? Like I install other Linux guest as the paravirtual ones. If yes please give some brief steps for that.
 
 
A (G5.19): No, unless you ask Microsoft to port XP kernel to Xen PV model:)
 
 
Judging from the fact that XP was declared end of life several times, and the fact that even Hyper-V requires VT to run, I highly doubt they will ever create PV-enabled windows
 
 
Q (G5.20): I would like to move an existing [[W2K3]] install onto my new super duper xen box -- Installing linux based machine is no issue, it's the windows ones that keep getting me. I have Acronis which we usually use for bare metal restores, and it seems that bare metal restores don't want to work too well with XEN, any assistance/help/ideas ?
 
 
A (G5.20): I have successfully migrated several physical windows 2003 installs to Xen by adding the ide drivers as per http://support.microsoft.com/kb/314082 and then using Acronis True Image to copy the disks.
 
 
One issue I had was that the boot cd created by the version of True Image we have did not boot under Xen (hung on boot screen), but Acronis support sent me a version that did work (TrueImageLinuxServer8072_multiparam_Standard_english_il.iso). However due to using emulated nic and hd running True Image directly under Xen was very slow, my first solution to that problem was to make a small windows hvm install with gplpv drivers loaded and true image installed and then temporarily add the target block device to it in order to write the image, but I recently switched to using a WinPE boot ISO with GPLPV and [[TrueImage]]/Backup And Recovery installed, the Acronis products come with a WinPE/BartPE Image builder utility so its quite easy to do.
 
 
Also watch out for boot.ini, many servers come with a hidden partition on the boot volume for running diagnostics, in which case windows may be booting from the second partition, so you may need to adjust the boot.ini or you could remove it entirely and windows will then attempt to boot from \windows automatically.
 
 
Q (G5.21): Could we add a file image, block device or lvm to domU while it is running without restarting?
 
 
A (G5.21): Use "xm block-attach", and edit domU config file afterwards (if you still you file-based domU config) to make it permanent. Should work great with PV domUs.
 
 
There are cases when you have to reboot the domU anyway though, since the driver installation of a new disk on domU OS could require reboot. One example is when using Windows + GPLPV.
 
 
=== Devices ===
 
 
Q (G6.0): For my xen domUs I'm using a mixture of locah physical partitions (with LVM) and iSCSI disks. For local partitions, I don't have any problem, because LVM volumes are always the same. But for iSCSI disks, devices are assigned in the order they are connected, so I can't be sured that device that now is /dev/sdb (for example) will always be /dev/sdb.
 
So, is there any way to identify the physical device in the domU configuration not as phy:/dev/sdb, but something like phy:label=fslabel? Or is there any other solution to this problem?
 
 
A (G6.0): I go with phy:/dev/disk/by-path/ip-*-iscsi-iqn.* If you assign iscsi luns directly as domU's fs without additional partitioning, you could probably also use /dev/disk/by-label/* or /dev/disk/by-uuid/*
 
 
== Installation Questions ==
 
 
See [[Xen_FAQ_Installation]]
 
 
== Networking Questions ==
 
 
See [[Xen_FAQ_Networking]]
 
 
== Security Questions ==
 
 
Q(S1.0): If I install minimal linux for XEN in dom0 and a periphery firewall in domU and other applications in other instances of domU, is it possible to restrict/bind the network card to domU having periphery firewall and from there forward packets for dom0 or for other domUs?
 
Is this possible? If so, is it secure? Or does dom0 always have direct access to Network Card and needs a separate firewall? And packets will always route from dom0 to all domUs ?
 
What are the issues involved?
 
 
A(S1.0): The approach I've used at home is to hide a network card from Dom0 (see pic-back.hide) and pass it through to a DomU which then sees it as a native interface. I then run a firewall in the DomU and the outside traffic does NOT go through Dom0. The route for packets is then :
 
real i/f -> DomU (firewall) -> VIF -> int bridge [ Dom0 | VIF -> DomU ]
 
From security perspective, this is the same as having an L2 switch (when dom0's bridges have no IP address) or L3 switch (when dom0's bridges have an IP address)
 
 
Q(S1.1): I want to use a Disk Encryption and the conplete physikal Disk in a DomU. I prefere Truecrypt or Loop-aes. i will going to test loop-aes cause it should have the better performance.
 
But, did anybody here using truecrypt or loop-aes ? What is the better one, in the fact of speed ?
 
 
A(S1.1): dm-crypt/luks is one option, and performs about the same or better than loop-aes. Also it's less problematic because it doesn't use loop devic
 
 
== Design/Misc Questions ==
 
=== Nested Xen ===
 
Q (D1.0): Can I run Xen within Xen?
 
 
A (D1.0): Yes, You can install Xen on the base system, create a HVM domain, and install Xen in that guest domain. Note that the inner Xen system will not (yet) support HVM again.
 
 
=== How does Xen Work ===
 
 
Q (D3.0): How does Xen process System Calls on para-virtualized guest?
 
 
A (D3.0): When ever a system call is invoked via interrupt or sys center control gets transferred to the kernel (ring 0), which is then handled via system call handler. System call never goes to libc but Libc is a library that provides POSIX interface to the user space applications and in a way wrapper for invocation of a system call.
 
System call interrupt based [i386]: During booting process, linux kernel of a domU register's its IDT with Xen Hypervisor via HYPERVISOR_set_trap_table(trap_table); [arch/i386/kernel/traps-xen.c]. Xen maintains two IDT's, one global IDT (its own) and other per domain IDT. Xen uses global IDT to register the entire trap handler except for system call handler (int 0x80). When a VM gets scheduled, its system call handler (from per domain IDT table) is registered with the processor. Hence when a domain/VM executes a system call, its own handler is executed.
 
Implementation differs for x86_64: Xen registers its own system call handler with the processor and from that handler routes the request to VM/Domain specific handler.
 
 
Q (D3.1): How does Xen process System Calls on fully virtualized guest (HVM)?
 
 
A (D3.1): For HVM domU there is no change in the behavior of the system call. HVM is only supported for Intel-VT and AMD-SVM processors. These processors are virtualization aware. Virtualization aware processors provide a new ring (Root-Ring 0) with higher privilege for VMM and Guest OS continues to runs with the same privilege (as without Xen) in Non-Root Ring 0. Guest OS can issue the system calls the way it used to without Xen.
 
 
Q (D3.2): Can I run various DomU operating systems on a different Dom0 operating system?
 
 
A (D3.2): Yes.
 
 
Q (D3.3): Just curious to know, if there is any way that given a terminal to a box, we can determine is it a physical machine or a virtual machine ?
 
 
A (D3.3): You should be able to get some useful information from the DMI, e.g:
 
% for i in system-manufacturer system-product-name system-version\ system-serial-number; do echo -n "$i: "; sudo dmidecode -s $i; done
 
system-manufacturer: Xen system-product-name: HVM domU system-version: 3.3.1 system-serial-number: 89e5915f-dead-beef-cefd-46904ea94c4a
 
OR
 
Probably checking kernel process, check your process table for:
 
[xenwatch] [xenbus]
 
Another clue is checking the kernle suffix, for example:
 
<!-- # uname -r 2.6.24-23-xen -->
 
and the proc files:
 
/proc/xen/capabilities
 
 
Q (D3.4): What is STUBDOM ?
 
 
A (D3.4): Stubdoms are lightweight 'service' or 'driver' domains. The initial purpose was to offload qemu (for hvm guests) out of dom0.
 
So with stubdoms you can run hvm guest qemu in a separate stubdom, which boosts performance and makes it more secure.
 
stubdoms can also run for example pv-grub for pv guests, making it more secure compared to pygrub, which always runs in dom0.
 
http://wiki.xensource.com/xenwiki/StubDom
 
Presentation about stubdoms at Xen Summit: http://www.xen.org/files/xensummitboston08/SamThibault_XenSummit.pdf
 
http://blog.xen.org/index.php/2008/08/28/xen-33-feature-stub-domains/ http://blog.xen.org/index.php/2008/08/28/xen-33-feature-hvm-device-model-domain/ http://lxr.xensource.com/lxr/source/stubdom/README
 
 
Q (D3.5): When is hardware virtualization used in Xen? Is it required?
 
 
A (D3.5): Xen uses hardware virtualization for HVM guests. Xen will not launch a HVM guest unless hardware virtualization is turned on.
 
   
 
[[Category:Xen]]
 
[[Category:Xen]]

Latest revision as of 09:54, 26 January 2018

Icon Info.png The content of this page is available in targetted FAQ's. We are keeping this page for historical reasons (as it is likely to be frequently linked to). All FAQ's are at Category:FAQ.


For: