Difference between revisions of "Category:Host Configuration"

From Xen
(Created page with "The following lists some steps which are commonly necessary after installing Xen on a new host. '''For all pages in this category go to here'''. ==Bootloader Con…")
 
m (Bootloader Configuration)
Line 5: Line 5:
 
==Bootloader Configuration==
 
==Bootloader Configuration==
   
  +
===Gotchas===
''TBD''
 
  +
* There is an issue with Xen unstable (as of 7/16/2012) and some Linux kernels (confirmed in 3.2) where the kernel will restart the machine midway through the boot process. The fix is to add "xsave=0" to the boot parameters for both the Xen kernel line and Linux kernel line in Grub.
   
 
==Console Configuration==
 
==Console Configuration==

Revision as of 07:24, 16 July 2012

The following lists some steps which are commonly necessary after installing Xen on a new host.

For all pages in this category go to here.

Bootloader Configuration

Gotchas

  • There is an issue with Xen unstable (as of 7/16/2012) and some Linux kernels (confirmed in 3.2) where the kernel will restart the machine midway through the boot process. The fix is to add "xsave=0" to the boot parameters for both the Xen kernel line and Linux kernel line in Grub.

Console Configuration

TBD

Network Configuration

When running Xen on a host it is normal to require some particular setup of the network stack in order to provide a way for Virtual Machines to access the network. The most common of these is to use bridging.

Host Configuration/Networking contains information on setting up the host network configuraiton for XL and xend on a variety of Operating Systems .

Pages in category "Host Configuration"

The following 7 pages are in this category, out of 7 total.