Difference between revisions of "Xen ARM with Virtualization Extensions/Arndale"

From Xen
(Building Xen and Linux)
Line 6: Line 6:
 
Follow the step on the [https://wiki.linaro.org/Boards/Arndale/Setup/PXEBoot Linaro wiki], to build and install u-boot.
 
Follow the step on the [https://wiki.linaro.org/Boards/Arndale/Setup/PXEBoot Linaro wiki], to build and install u-boot.
   
To Build, get the source tree from the [http://xenbits.xen.org/gitweb/?p=people/aperard/xen-arm.git;a=summary repo], which contain patches to get serial and other device working on the board. Then, [[Xen_ARMv7_with_Virtualization_Extensions#Building_Xen_on_ARM|Build Xen on ARM]].
+
To Build, get the source tree from the [http://xenbits.xen.org/gitweb/?p=people/aperard/xen-arm.git;a=summary repo], which contain branches (last one is exynos5250-2013-03-22) with patches to get serial and other device working on the board.
  +
  +
git clone --branch exynos5250-2013-03-22 git://xenbits.xen.org/people/aperard/xen-arm.git
  +
  +
Then, [[Xen_ARMv7_with_Virtualization_Extensions#Building_Xen_on_ARM|Build Xen on ARM]].
   
 
Next step is to build Linux. So far, the development have been done using the Linux tree from Linaro, [https://wiki.linaro.org/Boards/Arndale/Setup/EnterpriseUbuntuServer#Build.2C_burn_uImage_and_dtb building linux]. Just make sure to "git checkout lue_arndale_3.7" and have those config options in .config:
 
Next step is to build Linux. So far, the development have been done using the Linux tree from Linaro, [https://wiki.linaro.org/Boards/Arndale/Setup/EnterpriseUbuntuServer#Build.2C_burn_uImage_and_dtb building linux]. Just make sure to "git checkout lue_arndale_3.7" and have those config options in .config:

Revision as of 15:42, 22 March 2013

The work for Xen on the Arndale Development board is on his way. So don't expect to have a usable dom0 yet.

Building Xen and Linux

The bootloader provided with the Arndale does not let Xen boot in hypervisor mode, so we will use the u-boot provided by Linaro.

Follow the step on the Linaro wiki, to build and install u-boot.

To Build, get the source tree from the repo, which contain branches (last one is exynos5250-2013-03-22) with patches to get serial and other device working on the board.

 git clone --branch exynos5250-2013-03-22 git://xenbits.xen.org/people/aperard/xen-arm.git

Then, Build Xen on ARM.

Next step is to build Linux. So far, the development have been done using the Linux tree from Linaro, building linux. Just make sure to "git checkout lue_arndale_3.7" and have those config options in .config:

 CONFIG_XEN=y
 CONFIG_XEN_DOM0=y
 CONFIG_HVC_DRIVER=y
 CONFIG_HVC_IRQ=y
 CONFIG_HVC_XEN=y

Also, multi CPU does not work yet with Xen on ARM, so make sure to remove:

 CONFIG_SMP=n

Resources