Difference between revisions of "Xen ARM with Virtualization Extensions/Salvator-XS"

From Xen
(Created page with "== General information == This Wiki describes how to run Xen on Renesas Salvator-XS board with R-Car H3 ES3.0 SoC. Main information how to deal with Salvator-XS board and the...")
 
(General information)
Line 3: Line 3:
   
 
Main information how to deal with Salvator-XS board and the reference software located at:
 
Main information how to deal with Salvator-XS board and the reference software located at:
https://elinux.org/R-Car/Boards/Salvator-XS
+
https://elinux.org/R-Car/Boards/Salvator-XS
https://elinux.org/R-Car/Boards/Yocto-Gen3/v5.1.0
+
https://elinux.org/R-Car/Boards/Yocto-Gen3/v5.1.0
  +
  +
Please note, although Wiki only covers Salvator-XS + H3 ES3.0 configuration, it is possible run Xen on other "board & SoC" configurations just updating platform specific parts (device-tree, etc). The hypervisor part will remain the same. As R-Car M3 ES3.0 (M3-W+) SoC is supported as well, the following configurations will work:
  +
https://elinux.org/R-Car/Boards/M3SK
  +
https://elinux.org/R-Car/Boards/H3SK

Revision as of 18:02, 30 July 2021

General information

This Wiki describes how to run Xen on Renesas Salvator-XS board with R-Car H3 ES3.0 SoC.

Main information how to deal with Salvator-XS board and the reference software located at:

https://elinux.org/R-Car/Boards/Salvator-XS
https://elinux.org/R-Car/Boards/Yocto-Gen3/v5.1.0

Please note, although Wiki only covers Salvator-XS + H3 ES3.0 configuration, it is possible run Xen on other "board & SoC" configurations just updating platform specific parts (device-tree, etc). The hypervisor part will remain the same. As R-Car M3 ES3.0 (M3-W+) SoC is supported as well, the following configurations will work:

https://elinux.org/R-Car/Boards/M3SK
https://elinux.org/R-Car/Boards/H3SK