Difference between revisions of "FreeBSD PVH"

From Xen
Line 9: Line 9:
# git clone git://xenbits.xen.org/people/royger/freebsd.git /usr/src
# git clone git://xenbits.xen.org/people/royger/freebsd.git /usr/src
# cd /usr/src
# cd /usr/src
# git checkout pvh_v5
# git checkout pvh_v10

Revision as of 16:29, 16 January 2014

This guide explains how to set up a FreeBSD PVH guest. The usage of PVH requires an Intel chip with EPT support.

This guide assumes that the user already has a working FreeBSD HVM amd64 guest installed, based on HEAD, and a Xen install using -unstable with a revision greater than b5dda35f5aa3ab5c7be2333a8a4e0cfa34226654.

Compiling the kernel

In order to compile a FreeBSD PVH capable kernel, we need to fetch the sources first (this should be done inside of the existing FreeBSD guest):

# git clone git://xenbits.xen.org/people/royger/freebsd.git /usr/src
# cd /usr/src
# git checkout pvh_v10

Note that at time of writing the most recent branch is pvh_v5 (this can change, so always look for the latest branch).

Now we can start the kernel compile process as usual:

# cd /usr/src
# make kernel-toolchain
# make buildkernel

Then, we need to copy the resulting /usr/obj/usr/src/sys/GENERIC/kernel kernel to the Dom0.

Finally, the following line has to be added to /etc/ttys:

xc0 	"/usr/libexec/getty Pc"         xterm   on  secure

And /etc/fstab should also be modified, in order to use xbd devices:

# Device	Mountpoint	FStype	Options	Dump	Pass#
/dev/xbd0p2	/		ufs	rw	1	1
/dev/xbd0p3	none		swap	sw	0	0

Now the FreeBSD HVM guest can be stopped, and we need to modify the configuration file so it looks like:

kernel = "/path/to/kernel"

disk = [

vif = ['bridge=bridge0,mac=00:ff:ff:ff:ff:ff']

name = "freebsd_pvh"


The main changes are the removal of the builder option, and the addition of kernel and extra instead. Also note the option pvh=1 must be set in order to boot in PVH mode. Then we can boot into the newly created FreeBSD PVH guest:

# xl create -c freebsd_pvh.cfg