This guide explains how to set up a FreeBSD PVH guest. The usage of PVH requires an Intel chip with EPT support.
This guide assumes that the user already has a working FreeBSD HVM amd64 guest installed, based on HEAD, and a Xen install using -unstable with a revision greater than b5dda35f5aa3ab5c7be2333a8a4e0cfa34226654.
Compiling the kernel
In order to compile a FreeBSD PVH capable kernel, we need to fetch the sources first (this should be done inside of the existing FreeBSD guest):
# git clone git://xenbits.xen.org/people/royger/freebsd.git /usr/src # cd /usr/src # git checkout pvh_v10
Note that at time of writing the most recent branch is pvh_v5 (this can change, so always look for the latest branch).
Now we can start the kernel compile process as usual:
# cd /usr/src # make kernel-toolchain # make buildkernel
Then, we need to copy the resulting /usr/obj/usr/src/sys/GENERIC/kernel kernel to the Dom0.
Finally, the following line has to be added to /etc/ttys:
xc0 "/usr/libexec/getty Pc" xterm on secure
And /etc/fstab should also be modified, in order to use xbd devices:
# Device Mountpoint FStype Options Dump Pass# /dev/xbd0p2 / ufs rw 1 1 /dev/xbd0p3 none swap sw 0 0
Now the FreeBSD HVM guest can be stopped, and we need to modify the configuration file so it looks like:
kernel = "/path/to/kernel" extra="vfs.root.mountfrom=ufs:/dev/xbd0p2" disk = [ 'phy:/path/to/block/device,xvda,w', ] vif = ['bridge=bridge0,mac=00:ff:ff:ff:ff:ff'] memory=4096 vcpus=2 name = "freebsd_pvh" pvh=1
The main changes are the removal of the builder option, and the addition of kernel and extra instead. Also note the option pvh=1 must be set in order to boot in PVH mode. Then we can boot into the newly created FreeBSD PVH guest:
# xl create -c freebsd_pvh.cfg