Tuning Xen for Performance
Tuning your Xen installation: recommended settings
There are several choices for storage, however it is important to understand that the IO performance inside of the guest depends greatly on the storage option used:
- LVM: this is probably the simplest way for obtaining good storage IO performance on Linux without much hassle.
- ZFS ZVOLS: this is a more advanced configuration, and should provide better performance if configured properly. ZFS has some advanced features like ARC, L2ARC and ZIL that can provide much better performance than plain LVM volumes if properly configured and tuned. Please note that due to ZFS memory requirements in this case the Dom0/Driver domain should be given at least 4GB of RAM (or even more in order to increase performance).
- iSCSI: the default toolstack in Xen supports using iSCSI disks as storage backends for guests. The performance of iSCSI greatly depends on the capacities of the server and the network components, but if configured properly should provide a performance similar to LVM or ZFS.
- Files: using files as backends for guest storage is not recommended for performance reasons, but it has several benefits in terms of features, like being able to use raw, qcow, qcow2 or vhd formats to store guests disks.
See Storage_options for more details.
If the host has more memory than a typical laptop/desktop system, then do not rely on dom0 ballooning. Instead set the dom0 memory to be something between 1 and 4GB adding dom0_mem=1024M to the Xen command line.
1GB is enough for a pretty large host, more will be needed if you expect your users to use advanced storage types as ZFS or distributed filesystems.
Dedicating fixed amount of memory for dom0 is good for two reasons:
- First of all (dom0) Linux kernel calculates various network related parameters based on the boot time amount of memory.
- The second reason is Linux needs memory to store the memory metadata (per page info structures), and this allocation is also based on the boot time amount of memory.
Now, if you boot up the system with dom0 having all the memory visible to it, and then balloon down dom0 memory every time you start up a new guest, you end up having only a small amount of the original (boot time) amount of memory available in the dom0 in the end. This means the calculated parameters are not correct anymore, and you end up wasting a lot of memory for the metadata for a memory you don't have anymore. Also ballooning down busy dom0 might have bad side effects.
By default Dom0 gets as many vCPUs as CPUs on the physical host. This might be a good idea if your host only has 4 CPUs, but as systems get bigger there's no reason to assign that many vCPUs to Dom0, so reducing it to something sensible is interesting for performance. In this case, the number of vCPUs assigned to Dom0 greatly depends on the host workload. For example, running HVM domains without stubdomains means that you can end up with a lot of Qemu instances in Dom0 that could be using quite some CPU, so in this case you should make sure that Dom0 has enough vCPUs assigned. In general you should not assigned less than 4 vCUPs to Dom0, and then you should pay attention to the load in Dom0 in order to make sure it is able to sustain the workload with the current assignation, or your guests will start to suffer performance degradations.
Another interesting approach is pinning Dom0 vCPUs to physical CPUs, this can be done by adding dom0_vcpus_pin to the Xen command line. Then once Dom0 has booted you can see to which CPUs the vCPUs have been pinned and exclude other domains from running on those CPUs. In this example I've used the following command line "dom0_max_vcpus=4 dom0_vcpus_pin":
# xl vcpu-list Name ID VCPU CPU State Time(s) CPU Affinity Domain-0 0 0 0 -b- 28.8 0 Domain-0 0 1 1 -b- 22.0 1 Domain-0 0 2 2 r-- 22.0 2 Domain-0 0 3 3 -b- 22.2 3
Now we have to prevent domains from using those CPUs (0 to 3), so Dom0 doesn't have to schedule out, this is done by adding the following in the guest configuration file:
This will make the domain use all available CPUs except the ones currently pinned to Dom0:
# xl vcpu-list Name ID VCPU CPU State Time(s) CPU Affinity Domain-0 0 0 0 -b- 30.4 0 Domain-0 0 1 1 r-- 24.2 1 Domain-0 0 2 2 -b- 23.4 2 Domain-0 0 3 3 -b- 22.8 3 guest 2 0 7 -b- 0.4 4-7 guest 2 1 4 -b- 1.4 4-7
Another option for those that don't want to pin Dom0 to specific CPUs is to increase the realitve weight of Dom0, so that it gets scheduled more often than unpriviledged domains. By default all guests in Xen (including Dom0) have a weight of 256, this might be a problem if all domains rely on Dom0 for IO, since Dom0 can easily become a bottleneck.
# xl sched-credit Cpupool Pool-0: tslice=30ms ratelimit=1000us Name ID Weight Cap Domain-0 0 256 0
An easy solution to this is to increase the weight of Dom0, while leaving the other domains with the default weight:
# xl sched-credit -d 0 -w 512 # xl sched-credit Cpupool Pool-0: tslice=30ms ratelimit=1000us Name ID Weight Cap Domain-0 0 512 0 guest 3 256 0
In this case Dom0 will get twice as much CPU time as a normal guest.
Tuning your Xen installation: advanced settings
HAP vs. shadow
HAP stands for hardware assisted paging and requires a CPU feature called EPT by Intel and RVI by AMD. It is used to manage the guest's MMU. The alternative is shadow paging, completely managed in software by Xen. On HAP TLB misses are expensive so if you have really random access, HAP will be expensive. On shadow page table updates are expensive. HAP is enabled by default (and it is the recommended setting) but can be disabled passing hap=0 in the VM config file.
PV vs PV on HVM
Linux, NetBSD, FreeBSD and Solaris can run as PV or PV on HVM guests. Memory intensive workloads that involve the continuous creation and destruction of page tables can perform better when run in a PV on HVM guest. Examples are kernbench and sql-bench. On the other hand memory workloads that run on a quasi-static set of page tables run better on a PV guests. An example of this kind of workloads is specjbb. See Xen_Linux_PV_on_HVM_drivers#Performance_Tradeoffs for more details. A basic PV guest config file looks like the following:
bootloader = "/usr/bin/pygrub" memory = 1024 name = "linux" vif = [ "bridge=xenbr0" ] disk = [ "/root/images/debian_squeeze_amd64_standard.raw,raw,xvda,w" ] root = "/dev/xvda1"
You can also specify a kernel and ramdisk path in the dom0 filesystem directly in the VM config file, to be used for the guest:
kernel = "/boot/vmlinuz" ramdisk = "/boot/initrd" memory = 1024 name = "linux" vif = [ "bridge=xenbr0" ] disk = [ "/images/debian_squeeze_amd64_standard.raw,raw,xvda,w" ] root = "/dev/xvda1"
See this page for instructions on how to install a Debian PV guest.
HVM guests run in a fully emulated environment that looks like a normal PC from the inside. As a consequence an HVM config file is a bit different and cannot specify a kernel and a ramdisk. On the other hand it is possible to perform an HVM installation from an emulated cdrom, using the iso of your preferred distro. It is also possible to pxeboot the VM. See the following very basic example:
builder="hvm" memory=1024 name = "linuxhvm" vif = [ "type=ioemu, bridge=xenbr0" ] disk = [ "/images/debian_squeeze_amd64_standard.raw,raw,hda,w", "/images/debian-6.0.5-amd64-netinst.iso,raw,hdc:cdrom,r" ] serial="pty" boot = "dc"
See this page for a more detailed example PV on HVM config file.
vCPU Pinning for guests
You can dedicate a physical cpu to a particular virtual cpu or a set of virtual cpus. If you have enough physical cpus for all your guests, including dom0, you can make sure that the scheduler won't get in your way. Even if you don't have enough physical cpus for everybody, you can still use this technique to ensure that a particular guest has always cpu time.
xl vcpu-pin Domain-name1 0 0 xl vcpu-pin Domain-name1 1 1
These two commands pin vcpu 0 and 1 of Domain-name1 to physical cpu 0 and 1. However they do not prevent other vcpus from running on pcpu 0 and pcpu1: you need to plan in advance and pin the vcpus of all your guests so they won't be running on pcpu 0 and 1. For example:
xl vcpu-pin Domain-name2 all 2-6
This commands forces all the vcpus of Domain-name2 to only run on physical cpus from 2 to 6, leaving pcpu 0 and 1 to Domain-name1. You can also add the following lines to the config file of the VM to automatically pin the vcpus to a set of pcpus at boot time:
A NUMA machine is typically a multi-sockets machine built in such a way that processors have their own local memory. A group of processors connected to the same memory controller is usually called a node. Accessing memory from remote nodes is always possible, but it is usually very slow. Since VMs are usually small (both in number of vcpus and amount of memory) it should be possible to avoid remote memory access altogether. Both XenD and xl (starting from Xen 4.2) try to automatically make that happen by default. This means they will allocate the vcpus and memory of your VMs trying to take the NUMA topology of the underlying host into account, if no vcpu pinning or cpupools are specified (see right below). Check out this article for some more details.
However, if one wants to manually control from which node(s) the vcpus and the memory of a VM should come from, the following mechanisms are available:
- vcpu pinning: if you use the cpus setting in the VM config file (as described in the previous chapter) to assign all the vcpus of a VM to the pcpus of a single NUMA node, all the memory of the VM will be allocated locally to that node too: no remote memory access will occur (this is available in xl starting from Xen 4.2). To figure out which physical cpus belong to which NUMA node, you can use the following command:
xl info -n
- cpupools: using the command xl cpupool-numa-split (see here) you can split your physical cpus and memory into pools according to the NUMA topology. You'll end up with one cpupool per NUMA node: use xl cpupool-list to see the available cpupools. Then you can assign each VM to a different cpupool adding to the VM config file:
To find out more about NUMA within this Wiki, check out the various pages from the proper category: Category:NUMA