OpenStack: Difference between revisions

From Xen
Jump to navigationJump to search
Line 41: Line 41:
dom0_mem=1024M
dom0_mem=1024M
=== Dom0 vcpus ===
=== Dom0 vcpus ===
Set the virtual CPUs to 4 by adding the following parameter to the '''grub''' command line:
Set the virtual CPUs to 4 by adding the following parameters to the '''grub''' command line:
dom0_max_vcpus=4 dom0_vcpus_pin
dom0_max_vcpus=4 dom0_vcpus_pin

=== Use LVM for local storage ===
=== Use LVM for local storage ===
Set the volume group name in the '''devstack''' parameters:
Set the volume group name in the '''devstack''' parameters:

Revision as of 23:05, 3 February 2015

From the OpenStack Documentation:

"The OpenStack Open Source Cloud Mission: to produce the ubiquitous Open Source Cloud Computing platform that will meet the needs of public and private clouds regardless of size, by being simple to implement and massively scalable."

USING XAPI

The OpenStack documentation reads:

"The recommended way to use XAPI with OpenStack is through the XenAPI driver. To enable the XenAPI driver, add the following configuration options to /etc/nova/nova.conf and restart OpenStack Compute: " 

compute_driver = xenapi.XenAPIDriver
xenapi_connection_url = http://your_xenapi_management_ip_address
xenapi_connection_username = root
xenapi_connection_password = your_password

"These connection details are used by the OpenStack Compute service to contact your hypervisor and are the same details you use to connect XenCenter, the XenServer management console, to your XenServer or XCP box."

While XAPI is the preferred mechanism for supporting XenServer (and its deprecated sibling XCP), most existing Xen Project integration with OpenStack is done through libvirt below.

USING LIBVIRT

As late as 2014, The OpenStack documentation used to read:

"It is possible to manage Xen using libvirt, though this is not well-tested or supported. To experiment using Xen through libvirt add the following configuration options /etc/nova/nova.conf:" 

compute_driver = libvirt.LibvirtDriver
[libvirt]
virt_type = xen

If your documentation says something like that, it is out of date. Currently, the majority of OpenStack integrations in the market use libvirt to employ the Xen Project hypervisor. SUSE, Ubuntu, and Oracle are all using libvirt in their OpenStack implementations.

As of February of 2015, the recommendation is to install software from the latest trees of both OpenStack and libvirt to make sure that your installation has all the patches needed to make Xen Project run correctly. With current levels of software, your Xen Project-based OpenStack cloud will simply work as expected.

The minimum level of libvirt you should use is 1.2.9; earlier versions will have stability problems.

TUNING

Use the following as a guideline for configuring Xen Project software for use in OpenStack:

Dom0 Memory

Set it between 1GB and 4GB by adding the following parameter to the grub command line: 

 dom0_mem=1024M

Dom0 vcpus

Set the virtual CPUs to 4 by adding the following parameters to the grub command line: 

dom0_max_vcpus=4 dom0_vcpus_pin

Use LVM for local storage

Set the volume group name in the devstack parameters: 

 VOLUME_GROUP=volume_group_name

PV vs HVM guests

Use the following OpenStack nova commands to select the virtualization mode: 

 nova image-meta set vm_mode=HVM
 nova image-meta delete vm_mode

HOWTOs

DOCUMENTATION

PRESENTATIONS

Retrieved from "https://wiki.xenproject.org/index.php?title=OpenStack&oldid=14071"